Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Sparkly cedar

Posts

Sparkly cedar

#1

Sparkly cedar

Pat Evans

I'm resawing some 8"x8" cedar for lining some hope chests. However, my Woodslicer blade seems to be dulling fairly quickly. I happened to pick up a slice of the cedar that I cut through the trunk. It caught the light just right, and you can see very tiny sparkles throughout the wood. What causes the sparkles, and is it something that would dull a blade quickly?

Re: Sparkly cedar

#2

crystals of the stuff that makes it smell

bill tindall

It is undoubtedly some terpene. I have seen them grow an inch long in a knot hole under optimum conditions.

Re: Sparkly cedar

#3

Ellis Walentine

Sounds like empirical proof, Pat

Ellis Walentine

I recall resawing some pretty gnarly stuff over the years, including teak, cocobolo and other resinous and silica-laden species. I don't recall aromatic cedar being terribly hard on blades, but I don't know how abrasive those terpine (?) crystals are. I'd be interested to know.

Ellis

Re: Sparkly cedar

#5

Re: Sounds like empirical proof, Pat

East Tennessee Bob (formerly Chicago Bob)

if it is soluble in a relative dry alcohol (isopropanol or ethyl)then it is terpenes; if not probably silica or maybe salt(?)

a family of compounds known as terpenes give fresh cut cedar and pine the wonderful smell. if this is what is causing your cutiing problems, periodically wipe your blade with alcohol. Some drug stores carry the 90% rubbing alcohol (isopropanol) which will work better than the over the counter stuff at 70%. the more water, the more "gummy" the residue on the blade.

Bob Haines

newest retired resident of Limestone, TN

and permanently saying good bye to Chicago winters

Re: Sparkly cedar

#6

Re: Sounds like empirical proof, Pat

FredD

Bob,

are you saying the average Intelligence Quotient went up in both States when you moved. ;-))

FredD