Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Any old band saw fans here?

Posts

Any old band saw fans here?

#1

Any old band saw fans here?

doug f, san clemente, ca

I've just finished restoring a 1947 Delta 14" band saw and I'm looking for some ideas on adding some sort of dust collection to the unit. I really don't want to drill a hole in the original wheel covers, so something added on would be outstanding.

Yes, I am searching on the old woodworking machine sites, but I thought I'd call on the collective wisdom of this group since the knowledge base here has proven more far reaching than others.

Any "old 'arn" addicts out there have some ideas?

Thanks.

Doug


Re: Any old band saw fans here?

#2

Jim DeLaney, Austintown, Ohio

Re: Any old band saw fans here? *LINK*

Jim DeLaney, Austintown, Ohio

Here's a very old PDF file of how I did mine, without making any modifications to the saw.

After all the work you did on that magnificent restoration, I'd hate to see even one screw hole added to it!


Bandsaw dust collection

Re: Any old band saw fans here?

#3

Re: Any old band saw fans here?

Gerry In North Surrey

I made something similar to Jim's, only not nearly as classy. I used a plastic dust pickup, mounted it on a chunk of hardboard, and epoxied several of LV's rare earth magnets to it all. I cut a slot for the blade to go through and hung it under the table so the blade ran through the open end of the pickup. With the magnets it's easy to remove and replace when changing blades and it captures at least 90% of the dust. Any dust that is carried past the pickup by the blade is either deposited in the bottom of the wheel guard or picked up on the next trip past the dust pickup. It works for me.

Re: Any old band saw fans here?

#4

Re: Any old band saw fans here?

doug f, san clemente, ca

Thanks, Jim. I thought the restoration was interesting; the dust collection looks it's going to be the real challenge. You did an excellent job designing and building it, I hope I can duplicate it somewhere near as well.

Doug

Re: Any old band saw fans here?

#5

Jim DeLaney, Austintown, Ohio

Re: Any old band saw fans here?

Jim DeLaney, Austintown, Ohio

Delta makes/made something similar to mine, except it attaches to the trunnion bolts under the table. It vents out the back, and for some strange (to me, at least) reason uses a non-standard 5" duct.

As I recall, Delta wanted about $60~70 for it, which was why I built my own.

The advantages of mine are that it requires no modifications to the saw, and it detaches very easily. It's also very efficient. It gets nearly all the sawdust. I have a 2hp DC, btw, with very good suction.

Re: Any old band saw fans here?

#6

There was a recent conversation on OWWM

Bill Houghton, Sebastopol, CA

Can't recall the thread title, but someone showed a port made from pine scraps that kind of wrapped around the under-table space. I'm not sure which messageboard it was on - "The Shop" or "SWARF" are the two likely places.

At least I think it was there...

Re: Any old band saw fans here?

#7

the old days.....

Mike in Southern NJ

Jim,

I'll say that's old, with a compuserve address.

Mike

Re: Any old band saw fans here?

#8

Re: There was a recent conversation on OWWM

Jay Hanks

Check out the July 2010 Wood magazine, might still be on news stands. In the shops tips section I gentleman posted what he did for your type of saw. He made brackets from flat steel to slip under the tunnions, then used rocklers blast gate brackets attched to that. For the dust collection he used a pvc T (1 end closed off) and hose clamps to attach to the blast gates. Non invasive and looks like it would help out a lot.

Re: Any old band saw fans here?

#9

Jim DeLaney, Austintown, Ohio

Re: the old days.....

Jim DeLaney, Austintown, Ohio

Yeah, I don't think that's valid any more... ;-)

I should probably edit or rewrite that - maybe even with better pix. Someday...

Jim D.