Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

New guy here; need some help!

Posts

New guy here; need some help!

#1

New guy here; need some help!

Dinan

So I've been working this old aquarium I have and so far all looks great except for the ugly stand. I think it's some kind of oak, but I'm not sure. I would like to change its color to a dark mahogany or black cherry, but I'm not sure how to proceed. I'm a DIY type of guy, but I've never worked with wood before so I was hoping you guys could help me out and get me pointed in the right direction.

Here is the piece in question (not sure how to post links, so copy and paste):

http://lh4.ggpht.com/_joesrHq18Xo/TGshsnxSzfI/AAAAAAAACI4/O4Y6AucpDBc/s912/IMG_3296.JPG

http://lh5.ggpht.com/_joesrHq18Xo/TGshusaLziI/AAAAAAAACJA/kCpdG5k-1W0/s912/IMG_3298.JPG

http://lh4.ggpht.com/_joesrHq18Xo/TGshwke6zHI/AAAAAAAACJI/QF5thuDVZOk/s912/IMG_3300.JPG

http://lh6.ggpht.com/_joesrHq18Xo/TGshv25jAOI/AAAAAAAACJE/rsDtMezgmfs/s912/IMG_3299.JPG

And here is the color I'm trying to change it to. Basically I want the aquarium to match the other stuff in the room. (Please excuse the mess):

http://lh4.ggpht.com/_joesrHq18Xo/TGshxUc_S-I/AAAAAAAACJM/69U9l51joco/s912/IMG_3301.JPG

Re: New guy here; need some help!

#2

JL

Re: New guy here; need some help!

JL

I didn't see any differences in your pictures.

Anyway, I would strip the existing color and finish with a paint stripper either a methylene chloride based stripper or Citri-strip. I would follow the directions and strip it a couple of times. I'd then gently sand it - making sure that you don't go through any layers. I would then stain it and put on a finish.

Re: New guy here; need some help!

#3

what I would do

Ryan Hartje

I would start by sanding on the back of one of the doors and see how the finish comes off. If it comes right off, go for it. If not try a stripper. I'm betting you wont get all the stain off, so sand evenly. When that is done, the easiest thing to do is take a door along with a door from the comp cab to to you paint supply house and see what they have for premix that will come close. Put on an oil stain, let it set for a few days and apply 3 coats of poly. I would probably wax as well for a little more water protection. Also, while you are at it, replace the hinges. You should be able to find similar style.

Re: New guy here; need some help!

#4

need more information

bill tindall

The base looks like an oak base ought to look. What don't you like about it- the color or the look of oak? Oak, well, looks like oak and no matter what you do it will still have its bold grain and nothing can be done to make it look close to mahogany or cherry.

The stain on this piece is typical for oak, but it could be made darker if that is the issue. In that case the old finish will need to be stripped, sand, restain, refinish.

Finishing takes skill and experience and neither is best gained by having-at a piece of furniture you hope will turn out acceptable. I have finished acres of wood and I still prepare a test piece if I am using a new stain or finish. Practice on a scrap piece of oak to get the color right and perfect the technique for applying stain and finish. It is perfectly acceptable to take a piece of oak to the place where you will buy stain and ask for samples of perspective colors to be dabbed on the test piece to see how it looks

Re: New guy here; need some help!

#5

disagree with 3 coats

bill tindall

Three coats of unthinned varnish will build a thick coat of finish, unnecessary except for a high wear surface like a floor. Three coats will result in that "plastic look" that many abhor.

If I was finishing this particular piece with vanish I would brush/spray on a thinned coat, 3:1 varnish to thinner), let dry and sand smooth with about 320 grit. Then I would add a top coat, thinned about 4:1.

Re: New guy here; need some help!

#6

A quick and dirty option...

John E in SC

This stuff is pretty much universally abhored by makers of fine furniture, and I haven't used it in years, but if you want to try something quick to see if it might suit, you could try Minwax Polyshades. This is basically a mix of stain and polyurethane that you brush on. I think they make a red mahogany that may give you enough red tint to match what you're looking for without having to strip the stand. It's difficult to get it to look even, but a couple coats will probably do fairly well. Again, I would never use this on anything I considered fine furniture, but for repurposing an aquarium stand, it may work with pretty minimal effort. If it doesn't suit, you can always strip and start over.

John (dodging the arrows bound to be headed his way!)

Re: New guy here; need some help!

#7

Re: disagree with 3 coats

Ryan Hartje

I guess I was considering a damp location. Also depends on how thick you apply the coats, I tend to go a little thinner. I also assumed brushing as it is a beginner. Personally, I would spray catalyzed urethane.