Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Dust Collection Enhancement

Posts

Dust Collection Enhancement

#1

Dust Collection Enhancement

Doug Reynolds in Seattle

About 13 years ago I bought a Powermatic Mdl 073 dust collector rated at 1 1/2 hp which has served me pretty well in my small garage shop. It never seemed to collect all the dust in the bottom of my cabinet saw or 6" jointer. Friday I picked up a 14" canister filter with the built in flapper for cleaning the inside of the filter for less than $100 plus Washington State sales tax. This means I no longer have to shake the built-up dust in my upper bag. Now I find no dust at the bottom of either the table saw or jointer. So far it is a significant improvement to dust collection for not much money.

Re: Dust Collection Enhancement

#2

Tell us again in a month or two....

Barry Irby

It is my understanding that the filters work very well for a while, until they become packed with dust that the flappers don't do a very good job of removing. Let me say, that I don't have a filter canister, I am still using the bag on mine, so maybe I am clinging to this mistruth to avoid being jealous and having to buy a filter.

So come back in a while after plenty of use, including collecting a bunch of sanding dust and tell us you as pleased as you are today. Hope it works for you.

Re: Dust Collection Enhancement

#3

Re: Collection *LINK*

Mark Mandell - Gone Round In Jersey

Is a function of filter area. The pleated filter cartridge has more than the standard bag and will, until it looses efficiency to clogged pores, do much better. Just as a shop vac does when the filter is cleaned. The real remedy is a bigger and better bag. When I put in a new blower, I also bought a large custom bag


from Process Systems. this is a very heavy lined pin felt bag that passes more air that the new blower (alleged to be 1500cfm) can move so the bag never fully inflates. I called them up, told them the blower size and ducting, and they sent me the bag; about $90 or so. Huge difference good people to work with.


Dust Bags

Re: Dust Collection Enhancement

#4

Dust/chips on that chainsaw

Tom Dunlap

And its 'my' color too! What model?

A number of years ago Husky/Jonsered changed their air intake system. They made the clutch blades into a centrifuge to act as a chip separator. As a bonus, the air going into the carb is pressurized just a bit so this has a slight turbocharging effect.

After switching all but one of my saws over to Husky/Jonny my air filter cleaning went almost to zero. It was rare that even one chip would be at the filter. The filters would have very little dust too. With chainsaws a plugged filter can lead to a lean fuel mix and burn the saw up within minutes/seconds. I still have a Stihl 066 and I make sure that I clean the filter often. If I have a large stump to flush cut I might stop half way through and clean the filter. Never have to do that with the Husky/Jonny- saws.

Re: Dust Collection Enhancement

#5

Re: Dust/chips on that chainsaw

Mark Mandell - Gone Round In Jersey

372-XP pulling 28"

[r-r-r-r-o-o-o-pah] :D

Re: Dust Collection Enhancement

#6

Re: Dust/chips on that chainsaw

Tom Dunlap

I was hoping that it was a 372xp! My favorite big/medium saw. One of the best saws in its class ever made! Husky just upgraded the model, time will tell if they improved on a winner.