Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Layout definition . . .

Posts

Layout definition . . .

#1

Layout definition . . .

steve mackay

I threw this one to my Dad the tool & die maker and even he had done it but had no term.

You have a piece of round stock. You draw a line around the stock (circumference) that is equal distance from the end. How would you describe that line in a term ? The best that comes to my mind is a perpendicular something-or-other.

I built a fixture to mark the line but I wanted to give it a name.

Re: Layout definition . . .

#2

How about......

Phil Joines

Fred?

Re: Layout definition . . .

#3

Uhh.. regular truncation..or

Grant in Iowa

right angle truncation

Its a truncation for sure... just not sure how to classify it.

eh? (Just got back from vacation up north, eh?)

Regards,

Grant in Iowa

Re: Layout definition . . .

#5

Re: How about......

FredD

Well it is delineated equally , so what else could you say?

FredD

Re: Layout definition . . .

#6

Ellis Walentine

It's a bisector

Ellis Walentine

Re: Layout definition . . .

#7

Re: Radius or radial line

Al Stokka - Cambridge, Iowa

Re: Layout definition . . .

#8

Re: Radius or radial line

Randy

Circumfrence scribe

Re: Layout definition . . .

#9

A circle

Al Goldstein

If the stock is cylindrical then that line is a circle. You would be marking a circle on the surface of a cylinder. You could say a circle __ inches from one end to be more exact.

Re: Layout definition . . .

#10

Re: Layout definition . . .

Alan in Little Washington (NC)

A line delineating the intersection of a plane and a cylinder where the longitudinal axis of the cylinder is perpendicular to the plane.

If you write the equations for both figures and solve the simultaneous equations the end result is an equation of a circle X2 + Y2 = radius2

If you skew the plane the intersection becomes an ellipse.

I think . . . 8)