Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Drawer closer

Posts

Drawer closer

#1

Drawer closer

james runchey

I want to make a lamp base to house a couple of remotes. It will only be a couple inches high by 10 inches wide by 10 inches deep. I want it to look like a monolithic slab with the drawer hidden. Is there a good way to open the drawer with no pull visible?

Re: Drawer closer

#2

Drawer push

Hoa in Alameda

The last time I checked, there were no invisible drawer pulls but drawer pushes are always invisible ;)

Can you design the drawer so that it is pushed open from behind the slab?

Re: Drawer closer

#3

Re: Drawer push

Gary Smyth

How about a spring catch attached to the back of the drawer. Push in and it catches. Push in again and the spring releases and the drawer pops out. Cabinet shops should have a demonstrator for you to look at.

Re: Drawer closer

#4

Re: Drawer closer

FredD

Glaziers use a tubular black plastic spring loaded catch for glass doors , I have used many times.

Installed behind the drawer , so the drawer is flush when closed , all it needs to open is simply touch the drawer.

Check you local Glass shop.

FredD

Re: Drawer closer

#5

Lee Grindinger

Google "touch latch"

Lee Grindinger

Re: Drawer closer

#6

Re: Drawer closer

Earl Kelly

You can use drawer Pushers for standard glides or go high tech with the Blum Tip-On Tandem.

Blum - http://www.blum.com/us/en/01/40/90/10/index.php

Drawer pusher - http://woodzone.com/Merchant2/merchant.mvc?