Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Recent Student Work

Posts

Recent Student Work

#1

Recent Student Work

Sgian Dubh

Nowadays I don't have much opportunity to design and make my own furniture due to my full-time teaching commitments and a rather large ongoing sideline involving the research and writing up of a technical manuscript on timber technology. I do however oversee the developing furniture designing and making efforts of the students on the furniture course I run. This means doing pretty much everything from writing the course curriculum, creating the briefs, teaching the learners both theoretical and practical furniture making skills, offering guidance on a range of furniture subjects, etc.

I've attached a couple of links to pages at my website where I hope some of you will have a browse to see the work that (hopefully) some, or perhaps quite a few, future furniture designers and makers have created. On show at these pages is probably only about 20 or 25 percent of all the work furniture students on the course do. Only actual furniture designed and made by recent graduates is shown, and not all the graduates work was photographed to make it on to these web pages. There is probably as much work again, or perhaps more, created by first year students. Secondly, only part of what students learn is practical furniture designing and making, the rest of what they are asked to study being academic in nature. Anyway, here are the links:

2010 Graduate Work, and a live project for final year students sponsored by the owners of Thorp Perrow Arboretum in North Yorkshire, England. Slainte.

Re: Recent Student Work

#2

Ellis Walentine

Creative stuff, Richard

Ellis Walentine

I particularly liked the sculpted plywood desk, the mirror-image daybeds and Elizabeth's laminated chaise. It is clear that these students were encouraged to think daringly out of the box.

Thanks for posting. Keep up the great work.

Ellis

Re: Recent Student Work

#3

Clint Searl

Re: Recent Student Work

Clint Searl

Some interesting work.

Clint

Re: Recent Student Work

#4

Question

Bill Tindall

How are the shelves in Greaves project attached to the legs?

That was a most enjoyable tour of student work. I especially liked the hose and cart for the Garden projects.

Re: Recent Student Work

#5

Re: Recent Student Work

FredD

Thanks for posting Richard, your Students attention to detail is very good.

I would like to lay down on the Chaise Lounge but I am afraid it would break with me ;-))

FredD

Re: Recent Student Work

#6

Re: Question

Sgian Dubh

Bill, a nosing router cutter formed a round bottomed (flute profile) notch that arcs part way around the circumference of the leg. This fluted notch profile matched an arcing torus profile on the edge of the oak horizontal pieces. The profiled arc cut around the circumference of the leg was done with a jig to hold and rotate the leg underneath the router cutter mounted in an overhead router.

If I remember right the torus profile on the edge of the shelves and table tops were done with a hand held router and a pattern. I think the two matching parts are held together with a couple of dowels and glue in each joint, although I may have that wrong.

There has been a lot of work go through the workshop in the last year, and I don't always recall every single detail of every piece. Slainte.

Re: Recent Student Work

#7

Alan Young

Inspiring pieces. Thanks for sharing these!

Alan Young

Re: Recent Student Work

#9

Lee Grindinger

Good stuff

Lee Grindinger

Benali's benches are wonderful. How much of the design was dictated by the client?

Nice work, Richard. You must be a very good teacher to inspire such creativity and craftsmanship.

Lee

Re: Recent Student Work

#10

Barb Siddiqui

Re: Recent Student Work

Barb Siddiqui

You can be very proud, Richard. What a great job you are doing! Beautiful work.

Re: Recent Student Work

#11

Re: Good stuff

Sgian Dubh

Lee, I think the client gave the designer a fairly free rein, except that the framework had to be metal for some reason I can't recall, and the wood had to be dark-- mahogany'ish in colour.

Thanks for the compliments, although I'm not sure how much I 'inspire' the students. I suppose the fact that I write the briefs so that students are able to take on such challenges has a role, although there is a risk that even a very good student can get out of his or her depth and that does occur from time to time. It can be very hard to monitor every student when there may be 50 or 60 individual projects all going on at once if you look at all the students at all levels of the course.

As a footnote, thanks also to Ellis, Barb, and others whose names aren't popping into my head as I type for your kind words. Slainte.