Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

OT: electric chains saws and oil leaks

Posts

OT: electric chains saws and oil leaks

#1

OT: electric chains saws and oil leaks

doug f, san clemente, ca

I had to replace my old, old Craftsman chain saw after almost 15 years. So far I've gone through buying and returning three different electric saws, Homelite, Ryobi and a off brand from the Depot, all of which leaked oil. Is this just the nature of the beast? Do I need another brand? I'm cutting mostly tree limbs from 1-4", nothing heavy enough to justify a powered saw, but that may be the only option if all of the electrics leaks.

Help!!

Doug

Re: OT: electric chains saws and oil leaks

#2

Re: OT: electric chains saws and oil leaks

Bill Houghton, Sebastopol, CA

gas=powered saws can leak, too. I never leave the chain oil in my Poulan between intermittent uses.

Re: OT: electric chains saws and oil leaks

#3

nature of the beast

Hoa in Alameda

I've owned two electric chain saws. They all leaked oil. I then read somewhere (from a manufacturer's literature) that it was the nature of the beast. It recommended draining oil if the saw would be unused for a while.

But if what you cut are 1"-4", a reciprocating saw is much safer, faster, cleaner and lighter. There is no oil to content with.

If you don't have a reciprocating saw already and won't be using it to make a living, buy a cheapo one from Harborfreight. You can't go wrong for $20.

Re: OT: electric chains saws and oil leaks

#4

Oh, well...

doug f, san clemente, ca

Thanks for the info, guys. Useful and insightful as usual.

Looks like I'll have to put my "Swamp Loggers" complex on hold for a while and just break out the old Milwaukee reciprocating saw.

Doug

Re: OT: electric chains saws and oil leaks

#5

Re: nature of the beast

paul in AZ

Interesting. I recently got one of those Harbor Freight reciprocating saws mainly to whack palm fronds. Lighter and safer than a chain saw. It does them just great. I was surprised to find that it also cut tree limbs up to 6 inches diam. with no difficulty. It may be a POS as a pro's tool but for $20 it suits my needs.

Re: OT: electric chains saws and oil leaks

#6

Ahhh...the manly smell of...

Tom Dunlap

...two cycle exhaust and burning bar oil!

I've been around chain saws for close to 40 years...they all drip.

The bar oiler is driven off a gear on the crankshaft. The oil tank is vented to atmosphere. That makes two holes for oil to leak out of.

I work as an arborist and I've taken my 18V DW with me into the tree for some specific cuts.

Re: OT: electric chains saws and oil leaks

#7

So

Bill Houghton, Sebastopol, CA

the carpenters some time back adopted small chainsaws, and the arborists are using reciprocating saws?

Re: OT: electric chains saws and oil leaks

#8

Re: OT: electric chains saws and oil leaks

glh17

I have two and they both leak. I place cardboard and paper under them for storage in my back yard shed.

Re: OT: electric chains saws and oil leaks

#9

occasionally

Tom Dunlap

I use the DW recip for special cuts in the tree.

Besides, recip blades are cheap, cut metal and don't make dangerous kickbacks!

Chainsaws have been called the most constructive and destructive tool that humans have made.

There is a Japanese company, Silky, makes handsaws that will out cut chainsaws in some circumstances. Consider dragging a saw weighing 8+ pounds throughout the tree. Now, time to cut, put on a second rope/lanyard and ear protection for safety. Pffft...made the cut with my Zubat or Sugoi!

Re: OT: electric chains saws and oil leaks

#10

Re: OT: electric chains saws and oil leaks

Barry Irby

I have had three or more Electric Chainsaws and they all leak. As near as I can tell there is no mechanism or pump, they just drool oil onto the chain. I discovered the drool after leaving it sitting in my shop on the floor over night. What a mess. So, I have been using mine for years without oil. I cut mostly wet wood, facing up green turning blanks. I have not noticed any damage from running it "dry". I don't recall it cutting any better with oil. I may be wrong, but the oil seems to add nothing but mess to the process and what ever I may have lost in chain life (?) I probably have saved in cost of oil and clean up. Dripping oil might also be a ire hazard in your shed. Another thing, with any sort of heavy use, these saws seem to last months, not years, and I don't think the oil contributes much to that either way.

Re: OT: electric chains saws and oil leaks

#11

Is it bar oil that is leaking?

Bill Tindall

What is leaking and where? Sounds like bar oil, and well, that's normal. Use a blade guard or case, or don't store it any more in the china cabinet.

Re: OT: electric chains saws and oil leaks

#12

I'd think so...

John in NM

My wife's had an electric since before I met her and it leaks bar oil so fast that I actually hate filling it, knowing that what ever I'm cutting up will only take half or so and the rest will just leak out and make a mess. Hard to drain too. For some reason the two electrics I've used don't have a driven oiler, it's just a flexible plastic reservoir that you're supposed to pump manually by pressing on the filler cap.

By comparison, my old gas saw leaks bar oil, but no where near as much. There'll be a spot on the floor the size of a quarter after a month or so, but the electric will leak out all of the oil in about a week.

Re: OT: electric chains saws and oil leaks

#13

months not years

Tom Dunlap

there are cheap saws made to sell at HF and the borgs that are designed with a life span of less than 100 hours of run time. With occasional use and fuel issues a lot of these junkers have problems within just a few hours. Repairs outcost the cost of a new saw.

Like any purchase, look at value.

Oh...and be responsible for buying something that will not be recycled and adds to the heap at the dump.

If you're driven to have a gas chainsaw find the local repair shop where the arborists do their trade. Talk with a sales rep/mechanic and have them scout of a trade in. Knowing that they have an outlet for a used saw they will likely sweeten a deal for a pro user. Getting a gently used quality saw is a much better value than a brand new junk saw. Most of the saws that I've run would have made good homeowner saws well into their lives.

Tom

Re: OT: electric chains saws and oil leaks

#14

It is an electric chain saw...

Bill Houghton, Sebastopol, CA

if it was the motor leaking, it'd be leaking smoke.