We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
If I read you right, you're talking about insetting shelf support tracks vertically in the sides of your bookcase(s). I usually think of pilasters as (usually) fluted vertical faux columns on the faces of architraves and furniture. On a 9"-deep shelf, I'd consider spacing them 1" from the front and back edge of the shelves. On deeper shelves, I usually make it a bit deeper, say, up to 1 1/2" or even 2".
I don't think there is a standard for this. It never hurts to play with a mockup to see if there are any unforeseen effects of the placement.
I never heard the term assigned to a part of a Cabinet or Furniture for that matter. In the building industry ,a Pilaster is a rectangular column against a wall with three sides slightly projecting , it may or not be a supporting column.
I'm used to seeing this hardware referred to as standards, but I see that Lee Valley calls them pilasters. Either way, you should be fine spacing them an inch in from the front and the rear.
I think they are called pilasters by the catalogs because many people do not install them let in to the side panels. They are simply screwed on projecting three sides. Yet another example of a DIY "woodworker" shortcut instead of doing it right.
If we are talking about a metal strip with slots that accepts shelf supports and are 5/8" wide and 3/16" thick , the manufacturer calls them Shelf Standards as does any Cabinet Maker I know.
Well I had to go here before I could find the #255 Steel Standard with a brass look. I used them all of my cabinet making life , they are still called Steel Standards and if it pleases the company to refer to their Aluminum standards as Pilasters , they have bastardized the term when you consider they are set flush .
If you want a above the panel look , they have a winged standard.
Advertising people who have little or no knowledge about the products they are paid to hawk, muddy the waters if you will.