Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Long Drawer slides question?

Posts

Long Drawer slides question?

#1

Long Drawer slides question?

Barry Irby

Anybody got a good place to buy long drawer slides? Looking for 36" but might have to settle for less. Planning to use them for drawers under a king sized bed. Lee Valley has them, but I was hoping for something more economical.

Re: Long Drawer slides question?

#2

Re: Long Drawer slides question?

woodenleg

I hate to say this, try ebay. The last time I had a bunch of slides to get that was the best place for price and brand.

Dave

Re: Long Drawer slides question?

#3

Re: Long Drawer slides question?

Larry

Where are you located?

Re: Long Drawer slides question?

#4

Re: Long Drawer slides question?

Craig Daymon

Is it possible to change the design such that the drawers under the bed actually ride on wheels that run on the floor beneath the bed? Even beating Lee Valley's price on less expensive slides, you will most likely have to contend with less load capacity. Wheels would alleviate this issue and possibly allow you to exceed the capacity of even the Lee Valley slides. You could still have them track like traditional drawers by using side rails running in dadoes on the drawers and drawer box/frame. Also, 36" or more shouldn't be an issue either. Carpeting might cause some issues with this idea. Probably best for hardwood floors or very low pile carpet.

Just a thought. I know the slides you are talking about and they are not a small investment, but I think they have a place in the right application.

Sorry I can't help on other slide options.

-Craig

Re: Long Drawer slides question?

#5

Chester, VA near Richmond.

Barry Irby

Re: Long Drawer slides question?

#6

Re: Chester, VA near Richmond.

Larry

Check this site to see if there is any you like, If so I can see if I can get a price for you. I have a small cabinet is Calif.

Re: Long Drawer slides question?

#7

Try CSH (Custom Service Hardware) by

Rich Pearson in Mill Creek, WA

going to the Marketplace page and clicking on their logo.

I bought many pairs of 150 lb. full extension slides for my kitchen cabinetry upgrade and the quality is excellent!

Also, by clicking through WoodCentral's page, you give Ellis a boost also! :)

Re: Long Drawer slides question?

#8

I don't understand your post

Barry Irby

Re: Long Drawer slides question?

#10

Re: Long Drawer slides question?

Dave Kreuzberg

Woodworkers Hardware has 500# rated slides, up to 60", but VERY pricey. Have you thought about making two drawers across the bed width, and using slides a little shorter than half the bed width? (Bed would have to be accessible from both sides, with plenty of clearance.)

Re: Long Drawer slides question?

#11

Re: Long Drawer slides question?

Barry Irby

This is a king sized bed, 76" wide. I split the base or platform into two pieces, left and right. The drawers are about 36 1/2" "long" or deep.

I saw some of those slides at more than $100 each. Ain't happenin'. Found some 28" one at less than $15. More my speed. I suspect the drawers will get little use, mostly for long term storage.