Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Lightweight Flexible Wood Recommendation

Posts

Lightweight Flexible Wood Recommendation

#1

Lightweight Flexible Wood Recommendation

Steven P. Bellner

I am building 19th-century kites using kraft paper and wooden frames. High-tech kites today use carbon fiber rods and lightweight nylon, but I want to make some larger designs using traditional materials.

My question is: what would be a good wood to use that is lightweight, flexible, and generally resists splitting? The wooden stringers are typically 3/16 to 1/4 inch square. Grooves are cut into the ends to hold the outer string, and the grooves are whipped and varnished to prevent splitting. My initial inclination is poplar, but I'm thinking pine or spruce may work equally as well. The only problem with the softwoods is finding stock that isn't loaded with knots.

Re: Lightweight Flexible Wood Recommendation

#2

Clint Searl

Bamboo or riven hickory

Clint Searl

Re: Lightweight Flexible Wood Recommendation

#3

Re: Lightweight Flexible Wood Recommendation

woodenleg

When I was growing up, we used willow branches. We would strip the bark off and notch the ends. We also used them for arrows. Lots of willows, no money.

Dave

Re: Lightweight Flexible Wood Recommendation

#4

Re: Lightweight Flexible Wood Recommendation

Randy Johnson

I might be wrong, but I think that spruce was often the main wood used for aircraft in the days of fabric covered wings and bracing wires. Hickory would be good but would be a little heavier, although probably not enough to make a difference.

Some folks in the muzzleloading game soak ramrods (almost always hickory) in tubes filled with kerosene. After several months the wood becomes so saturated that it's possible to bend it double without breaking. At least that's the claim. I have to admit I never tried it myself. If it does work, it should at least improve the flexibility of any wood you are going to want to bend.

Re: Lightweight Flexible Wood Recommendation

#5

Re: Lightweight Flexible Wood Recommendation

Randy Johnson

I might be wrong, but I think that spruce was often the main wood used for aircraft in the days of fabric covered wings and bracing wires. Hickory would be good but would be a little heavier, although probably not enough to make a difference.

Some folks in the muzzleloading game soak ramrods (almost always hickory) in tubes filled with kerosene. After several months the wood becomes so saturated that it's possible to bend it double without breaking. At least that's the claim. I have to admit I never tried it myself. If it does work, it should at least improve the flexibility of any wood you are going to want to bend.

Re: Lightweight Flexible Wood Recommendation

#6

First time for everything

Randy Johnson

I hit the post button, went to take a shower, and when I came back it looked like the post was still trying to upload. I hit the refresh button, and presto!, a double post. Things like that should not happen on a Wednesday.

Re: Lightweight Flexible Wood Recommendation

#7

What about balsa wood?

Charles Yawn

That's what the kites in my youth were made with.

Re: Lightweight Flexible Wood Recommendation

#8

red cedar

Bill Tindall

Red cedar has exceptional bending strength. I have made canoe paddle shafts from it. Spruce would be the traditional wood for this application. It was used in airplane construction before aluminum.

Re: Lightweight Flexible Wood Recommendation

#9

Re: Lightweight Flexible Wood Recommendation

John McGaw

Just a guess really but I suspect that riven clear spruce (ideally old-growth) would be ideal from a weight vs. strength viewpoint.

Re: Lightweight Flexible Wood Recommendation

#10

I would stay with spruce, or Western Red Cedar

Keith Newton----Little Rock, Arkansas

If you wanted to add some stiffness, you might up the dimensions, and flute the sides to keep the wait low. Or even better, you could flute the two halves before gluing, making a hollow wood square or round tube, if you need to stiffen without adding weight.

Also, you can soak the ends with the thin / fast CA glue to virtually turn the ends into plastic, to toughen that part, after you have shaped it and whipped it.

Re: Lightweight Flexible Wood Recommendation

#11

Re: Bamboo

Al Stokka - Cambridge, Iowa