Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Moving News and Plywood Question

Posts

Moving News and Plywood Question

#1

Moving News and Plywood Question

Thomas Skaggs, Foothills of Mount Level

Well folks, after over 19 years of living in the same house we have decided we needed a change. Last week I closed on a very cool Mid Century Modern house. It was designed by a talented local architect and built in 1958 for a local Judge. The style of the house will be perfect for my style of design, so I am anxious to get busy making furniture for the place. Only one problem....it has no workshop!

It has a half acre yard so I'll have room to build a new shop. This time around I am thinking of covering the interior walls with plywood. That said, what to specify? Any good suggestions for a durable and yet decent plywood for interior shop walls?

T.

Re: Moving News and Plywood Question

#2

MDO

Mark Mandell - Gone Round In Jersey

Re: Moving News and Plywood Question

#3

Did I mention budget?

Thomas Skaggs, Foothills of Mount Level

MDO is a good call. Around these parts it's over $50 for a 4X8 one good side. Hoping to find something a little easier on the wallet?

Re: Moving News and Plywood Question

#4

Clint Searl

Re: Moving News and Plywood Question

Clint Searl

I used 1/2" Borg ply to line my shop. Painted it with a pale warm white to balance the fluorescent fixtures and keep the area bright. Looks good, durable, and can hang stuff from it.

Clint

Re: Moving News and Plywood Question

#5

Ellis Walentine

In our old shop...

Ellis Walentine

... in the machine room I had wafer board horizontally around the bottom of the walls and drywall above. The wafer board absorbed routine abuse pretty well. Real cheap, perfectly adequate, but your threshold of class might be a bit higher. :)

Ellis

Re: Moving News and Plywood Question

#6

Re: Moving News and Plywood Question

John E in SC

I used OSB for mine. You won't get any cheaper. I painted it white, and once painted, it looks perfectly fine. It does soak up a good bit of paint though. Ordinarily, I really don't care for OSB, but so far, it's held up well, and looks fine for a shop. Cost was the deciding factor for me.

Re: Moving News and Plywood Question

#7

Also,

John E in SC

Also, my shop is in an unfinished basement, and my "ceiling" is Tyvek stapled to the floor joists above. It covers the insulation, reflects light well, and can be relatively easily removed to work on wires or pipes that run overhead. (And it was a cheap option too!)

Re: Moving News and Plywood Question

#8

a good idea

Bill Tindall

With a plywood wall you can hang stuff from the wall easily as it provides a place to screw, nail, insert hooks, etc. It would seem that any plywood would do.

Re: Moving News and Plywood Question

#9

Re: Moving News and Plywood Question

David Hay Denver

When I finished the inside of my shop, I added two layers of plywood: One layer of 3/8" CDX plywood and one layer of 3/8" bead ply (bead-board plywood). Painted the beadboard white and now my shop is quite bright.

David

Re: Moving News and Plywood Question

#10

Picky, Picky, Picky

Mark Mandell - Gone Round In Jersey

Well . . . . . . . .

If THAT's your delimiter, then I'd go with 5/8" T&G subfloor sheet stock. Will take way more abuse that OSB and seams stay tight. Run long-wise, screw it to the studs at "4 across".

Re: Moving News and Plywood Question

#11

Some Good Points Here

Thomas Skaggs, Foothills of Mount Level

Now that you mention it (and some have) there is a good chance I might paint the walls. If I do, then why worry about the aesthetics of the ply surface? Hmmm...cheap 1/2" ply may be the way to go.

Thanks folks!

T.

Re: Moving News and Plywood Question

#12

Clint Searl

The ultimate....

Clint Searl

The ultimate would be 3/4" T&G Advantech decking, and the wolf could never blow your house down. But 1/2" Advantech sheathing would be my real first choice. It's the best stuff in that category I've ever worked with. Flatter, tougher, and smoother face than any ply.

Clint

Re: Moving News and Plywood Question

#13

Good call!

Thomas Skaggs, Foothills of Mount Level

Hey, that's a good idea. I like the T&G aspect...good for energy control. Thanks!

Re: Moving News and Plywood Question

#14

Re: Moving News and Plywood Question

Barry Irby

I agree with the others that say you should use OSB and the Advantium stuff is smooth and well made. Also, look into Zip System plywood. Ugly colors, but a good coating.

What I want to see Is Pics of the house. No Pics? Didn't happen. Nice sideways gloat.

Re: Moving News and Plywood Question

#17

Re: Moving News and Plywood Question

FredD

If you have your heart set on plywood for a wall covering , check into treated for fire resistance 1/2" doug fir ply , which is way more expensive then drywall but less expensive then a fire in the shop .

My shop is 12 years old and the wall covering is painted drywall and I sleep well knowing the drywall will not support a fire.

FredD

Re: Moving News and Plywood Question

#18

Re: Moving News and Plywood Question

mdclor

You need to check code in your area. When I put my shop up, I was required to have 5/8" drywall on the walls and ceiling. Once it is inspected, I suppose you can put anything over the drywall you want, but it might also be prudent to check with your insurance company.

We need pix!

Re: Moving News and Plywood Question

#19

Thomas, One thing to use for sure,

Keith Newton----Little Rock, Arkansas

when you deck the roof, is to use Solar board. This is an OSB with a foil face. The foil will NOT radiate the heat from the Sun on the roof, which will save lots of utility cost.

However, I was wondering if the foil might make a good reflective surface for the lighting. There is some printing, but that might wash off with a solvent, and it might make a good difference on heating and cooling in the walls also.

I couldn't believe what a difference it made the first time I used it on a roof under black shingles. The heat just doesn't come through.

Re: Moving News and Plywood Question

#20

Re: Moving News and Plywood Question

Bob Lang

I don't want to sound like the safety police, but the solution I've seen is to cover the studs with the cheapest sheet goods you can find, probably OSB or CDX plywood, then cover that with 1/2" drywall. That way you can drive a screw anywhere you want to hang stuff, and you will have a barrier between a fire in the shop space and the framing. Your door and window jambs will have to be extended, but you'd get off cheap and sleep better.

Bob Lang

Re: Moving News and Plywood Question

#21

Re: Moving News and Plywood Question

FredD

Now there is a good idea

FredD

Re: Moving News and Plywood Question

#22

Re: Moving News and Plywood Question

Dave Peebles Lyons, Ohio

Hi Tommy,

I have 3/8" plywood on my walls. No paint, just years of dust and curse words that may have stuck in the cracks. :)

But I sure hope your buddy can help you break in your new shop.

Best wishes,

Dave


img

Re: Moving News and Plywood Question

#23

Re: Moving News and Plywood Question

Terry Quiram

Tommy congrats on your new digs. My entire shop, walls and ceiling is OSB painted flat white. To cover the ceiling seams I used 2" wide pieces to make it look like paneled. I like it because I don't have to hunt for a stud to hang anything.

Re: Moving News and Plywood Question

#24

Check codes and insurance

Grant in Iowa

Before you leap, check locally applicable codes and with your insurance agent before getting too close to the plywood solution. Not sure what the outcome may be (and we'd all be interested in the answers), but thought I'd suggest that.

Regards,

Grant in Iowa