Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Need more hot air....

Posts

Need more hot air....

#1

Need more hot air....

Marv

Hi Folks,

I have a couple small tubeless tires on a small John Deere trailer that have gone flat. They are about the size of a wheelbarrow tire. There's a gap between the tire and the rim. My small compressor isn't big enough to pump enough air in fast enough to seal it. I attempted to close the gap with bungee cords but to no avail.

I've seen on Youtube how propane or similar gas can be injected into the tire then lit to make it explode which pressurizes the tire. This method makes me a bit nervous, having never done it. On Youtube, they were doing it with large truck tires. On a small tire, is it possible to put too much gas in the tire and blow it clean off the rim?

Anyone ever do the gas thing? Is there a safe way to do it? What precausions should taken? Is there another way thats easy for an old f**t like me to compress the outer circumference of the tire to get it to close the gap without using gas?

If the gas method is used, do you just leave the gas in the tire? or bleed some off and replace it with air? :\

Thanks,

Marv

Re: Need more hot air....

#2

Re: Need more hot air....

bud from feasterville

I use a ratchet strap around the outside circumferance (sp) of the tire. With a little work and some adjustment it has always worked on small tires.

Bud

Re: Need more hot air....

#3

Me too....

Barry Irby

I have nylon strap clamps I use. Buy them at the borgs for about ten or twelve bucks. they are handy for lots of things, including clamping stuff.

Re: Need more hot air....

#4

Re: Need more hot air....

Galen Vetterick

Ratchet strap is good as suggested. Simple rope cinch or an old belt if the tire is small. If you still have small gap and the air supply is just marginal try removing the valve stem core to let the air in faster and once seated you can install stem and air it up.

No way would I use any explosive gas! Safer to remove and find a good air supply.

Re: Need more hot air....

#5

Re: Need more hot air....

Bill White

Just turn on CNN.

Ratchet strat and NO GAS.

Bill

Re: Need more hot air....

#6

Re: Need more hot air....

John E in SC

Agree with all of the above posts - you should be fine using a ratchet strap and taking out the valve stem. Make sure the tire bead and rim are clean, and sometimes swabbing with soapy water can help it seal faster.

Having said that, I have used the "explosion" method with a big tractor tire, and it worked like a charm. I've never heard of doing it with propane, but just a quick squirt of ether (starting fluid) and then throwing a match. Scared the heck out of me, but worked like a charm after an incredible frustrating several hours trying to get a big tractor tire to seal. I can't imagine you would have to resort to that with a small tire though. As a matter of fact, if I couldn't get a small tire to seal, before I tried the explosion method, I'd just take it off and take it to a tire store and pay them a few bucks to inflate it for me. That wasn't an option with my tractor tire, or I would have done so in a heart beat.

Re: Need more hot air....

#7

SWMBO Says I'Ve Always Had More Than Enough

George Colonel's Workshop-Havertown PA

Adequate Supply of Gas, too.

Re: Need more hot air....

#8

Re: Need more hot air....

steve mackay

Used to hear about it in the ARMY. The legend said a table spoon dripped around the bead. Never had the guts to try it though. In my mind it conjured up images of a couple cubic feet of fuel / air bomb. I used to take HMMV tires off post to a tire shop and pay out of my pocket. 'Course by then I'd lost my invincable status.

Re: Need more hot air....

#9

Same here!

Tony - Memphis

I put that Green Slime in all of my "yard" tires and it works great. Can't remember the last time I had to air up my wheelbarrow.

Tony

Re: Need more hot air....

#10

Got-R-Done!

Marv

Found an old belt hang'n in the closet. Used some soapy water around the bead, set the rim on a coffee can so I could center the tire up and down on the rim, wiggled it a bit while putting in air. Filled er rite up. ;)

Thanks guys for your suggestions. Sure was tempting to use some starter fluid though. Looked easy on YouTube.

I used the Green Slime in my wheelbarrow tire too. Hasn't gone flat since. Before that, it was always going flat. Gonna hafta git some more of that stuff.

Marv

Re: Need more hot air....

#11

Re: Need more hot air....

Bob Entwisle in NJ

Hi Marv,

In a pinch with nothing else available, I've used a hunk of clothesline and a slipknot or tourniquet(sp?) to cinch up wheelbarrow tires enough to re-inflate them with one of those no-volume 12v cigarette lighter compressors. A ratchet strap would be easier to to get the tire tight to the rim.

I'd keep away from propane and fire.

If you did do the propane thing you sure would want to bleed off all the propane and re-inflate with air, though i guess most of the propane is burned up in the explosion:)

My $0.02.

Bob in NJ