Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

21st Century Workbench Begins!

Posts

21st Century Workbench Begins!

#1

21st Century Workbench Begins!

Stephen Kirk

After cutting down a few ash trees, having them hauled to the mill, cut, dried and brought back home I have finally started on my new workbench. I'm building Bob Lang's 21st Century Workbench. I got the boards for the top milled and I'm letting them sit for a few days. Working pieces this big is new for me and in mid 90s heat is quite a workout. Right now I have 14 boards, ~3 3/4 x 3 1/4 x 84 sitting on sticks. Since i have a limited supply not everything is great, so I'll have some imperfections to work around, but this way I'll always know where it came from.

My current bench is a solid core door on a 2x4 base. It's served me well, but I'm looking to upgrade. Bob's design looks great for a mixed hand and power tool guy. This will be a side project, but hopefully I can finish it in a few months.

I'll try to get some photos during the process. Anyone else build this bench? Any good lessons?

Re: 21st Century Workbench Begins!

#2

Re: 21st Century Workbench Begins!

Brint in Richmond, VA

I don't have nearly enough experience to offer any advice, but wanted to offer my "Good luck!" Keep us posted - that's a project on my list, as well, and I'd be grateful to see how you go about it.

Re: 21st Century Workbench Begins!

#3

Re: 21st Century Workbench Begins!

Bob Lang

Mine turned out pretty well.

Bob Lang

Re: 21st Century Workbench Begins!

#4

Re: 21st Century Workbench Begins!

Chuck Bender

Stephen,

Good luck on the build. I know you were talking about it last week here in the shop. Glad to see you getting started so quickly.

Re: 21st Century Workbench Begins!

#5

Re: 21st Century Workbench Begins!

Stephen Kirk

I saw yours last year at WWIA. It did indeed turn out well. It should be a fun build too, lots of interesting work to do (after the tedious stock sizing is done).

Some of my 8/4 stock dressed out under 1 3/4, so I'm going with 14 boards for the top. No biggie, little extra glue. My lumber has a lot of imperfections (was standing in front of the house last fall, price was good!) so I'll work them in and pretend I meant it that way.

Thanks for coming up with the design. I'll get some pics up as I move along.

Re: 21st Century Workbench Begins!

#6

Re: 21st Century Workbench Begins!

Stephen Kirk

My one car garage workshop is getting tight. I have a large lumber rack which I want to move out and into my tarp shed where I'm storing lumber now. In order to make room for that, I need to use up some wood in there, so I figured I'd pull out the big ash planks and mill them down for the bench top. It gets me a little closer to having some space, provided I get to it before Teresa fills it with hay.

I also grabbed a few 8/4 oak planks to turn into a garden bench for the Guild's Build a Chair competition. Plus there's a mostly completed rolling kitchen island in the shop too. I like to keep a few projects moving so I can limit the down time while waiting for glue-ups to dry or lumber to acclimate (even if Glen says I shouldn't!)

Thanks for the carving classes, fun days and a lot of learning.

Re: 21st Century Workbench Begins!

#7

Re: 21st Century Workbench Begins!

Stephen Kirk

I'll post some updates as I move along.

Re: 21st Century Workbench Begins!

#8

The top, in 14 pieces

Stephen Kirk

Nothing fancy yet, but I did make some boards.