Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

OT Gluing Car Door panel Question

Posts

OT Gluing Car Door panel Question

#1

OT Gluing Car Door panel Question

Barry Irby

I put a board across the back seat of my Honda CRV and shut the door. The board was too long on one end and cracked the door panel. Its some kind of black plastic. Is there some sort of glue that might fix it?

Re: OT Gluing Car Door panel Question

#2

Re: OT Gluing Car Door panel Question

del schisler

yrs ago we used to fix radio plastic case's with lacqure thinner We would take and run a line of thinner down the break and hold it togother That fixed lot's of cases May not work on your's But i would try it if it were mine ??

Re: OT Gluing Car Door panel Question

#3

Re: OT Gluing Car Door panel Question

Don Evans

If you can find out through car maker WHAT type plastic it is then you can maybe have some success. Without knowing that you may not have much luck.

There are special glues for acrylic verse other plastic's. As an example go to:

www.usplastics.com

click on "sheets, rods" etc then on "cements", the one's for acrylic and polycarb are like water. If you decide to order one of them also look for the bottle applicators they have for them with the very thin metal rod in top of bottle, they are cheap and you will absolutely need them.

Don

Re: OT Gluing Car Door panel Question

#4

Re: OT Gluing Car Door panel Question

FredD

I would try the General Purpose version of PVC glue that Plumbers use, it is handy as hell for the plastics I have used it on.

FredD