Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Question, Ellis on bandsaw resaw blade

Posts

Question, Ellis on bandsaw resaw blade

#1

Question, Ellis on bandsaw resaw blade

Bill Tindall

Below you mentioned you resaw with a 1" 2-3 blade (I presume Lenox?) on a 20" wheel. There has been some question as to what blade thickness a 20" wheel will accommodate. I would presume a 1" blade would be the thicker 0.03X" (I can't remember the 3rd decimal place), yes? It does fine?

Re: Question, Ellis on bandsaw resaw blade

#2

Ellis Walentine

Gauge v. wheel diameter

Ellis Walentine

Yes, Bill, my 1" blades are .035" thick and do fine on a 20" saw. I have never had one break because of metal fatigue, which would be the issue if the wheel diameter were too small for that gauge of steel.

Ellis

Re: Question, Ellis on bandsaw resaw blade

#3

removal of last impediment

Bill Tindall

I have been considering purchase of such a blade, Lenox, but had some concern about the thickness being on the edge of what a 20" wheel would accommodate. Now I just need to get a line of credit established at my local loan office and go order one.

Re: Question, Ellis on bandsaw resaw blade

#4

Re: removal of last impediment

David Yoho

Bill, for what it's worth, I've been using a 1" Lenox carbide blade on my 16" Mini Max for years without a problem. Granted I don't run it every day but it has been fine. I do remove the tension on the blade every time I finish working with it. There was debate at the time I bought mine as to whether it would work. The Mini Max folks said it would and, so far, they've been right.

David