Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Morris chair cushions; leather

Posts

Morris chair cushions; leather

#1

Moses Yoder

Morris chair cushions; leather

Moses Yoder

I am getting ready to build a couple Morris chairs for a friend and was wondering about a source for cushions. I am planning on customizing the size of the chairs to fit her comfortably since she is kind of on the short side, but the chairs should still be okay for someone of medium height to sit in. So the cushions will need to be built to my specs, and she wants leather. Also any other pointers you have on building Morris chairs would be good. I have FWW #101, August 1993 issue that I am using as a guideline for design. I know Jim Shaver built a few of these some years ago and I plan on looking up his posts on them.

Re: Morris chair cushions; leather

#2

JL

Consider using "Pleather"...

JL

It looks like leather and sews a lot better.

I am NOT a PETA person. I have a .30-06 and I use it. I have leather belts and shoes. I just remember what a PITA it was to sew leather. Of course if you have an upholstery person doing it - then consider doing it in leather.

Re: Morris chair cushions; leather

#3

Re: Consider using "Pleather"...

FredD

If the client specifies leather , then anything but, might cause you a problem.

FredD

Re: Morris chair cushions; leather

#4

Clint Searl

Re: Morris chair cushions; leather

Clint Searl

Custom chairs of the quality you'll produce deserve the best. Choices in real high end leather are almost endless, so find an upholsterer who can take your completed frames, help the lady choose the right leather, and make a set of spring down and down cushions. They won't be cheap, but they'll be comfortable and last forever. Don't try it yourself.

Clint

Re: Morris chair cushions; leather

#5

Re: Morris chair cushions; leather

Jesse Cloud

I think Clint hit the nail on the head. Go to a reputable upholsterer. Get the upholsterer involved during your design. There are a number of choices to be made that will affect the thickness of the cushion, best to get those decisions nailed down before you start making sawdust!

Its a hassle, I know, but you might want to build a prototype/model out of pine or poplar and drywall screws. Let your client sit in it and see if it is comfortable for her. If that is too much trouble, at least ask her to identify a chair she finds comfortable and measure for height (including the height of the cushion).