Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Hot air in the wood-shop *LINK*

Posts

Hot air in the wood-shop *LINK*

#1

Hot air in the wood-shop *LINK*

Bill Earl

Here's an...um...interesting joinery technique. I predict a run on hot-air guns at the borg. :D


Heat-Shrink Joinery

Re: Hot air in the wood-shop *LINK*

#2

Re: Hot air in the wood-shop

Bill Houghton, Sebastopol, CA

Looks to me like the reinvention of baling wire joinery. Once again, an old country technique gets redone with hi-techie stuff and introduced as if it's something brand new.

Re: Hot air in the wood-shop *LINK*

#3

Re: Hot air in the wood-shop

George Colonel's Workshop-Havertown PA

Good Morning Bill,

It happens every time I talk to my tools.

George

Re: Hot air in the wood-shop *LINK*

#4

Every time I open my mouth 

John Lucas

Re: Hot air in the wood-shop *LINK*

#5

Also: bamboo scaffolding *LINK*

Bill Houghton, Sebastopol, CA

which manages to handle way more stress than the furniture pictured ever will, without precision cuts on the joinery.

One discussion below; lots on the intertubes (161,000 results on a Google search).


http://www.designboom.com/weblog/cat/8/view/6888/hong-kong-bamboo-scaffolding.html

Re: Hot air in the wood-shop *LINK*

#6

Rick L

Re: It is brand new...

Rick L

Before the baling wire was the twine/rope version. Before that was the sinew from animals. Bark strips? Nothing wrong with technology putting a new spin on an old technique. You need to study things deeper in the design world. Many things peole would find hideous or just plain silly but it it all has it's place in the evolution of things.

Re: Hot air in the wood-shop *LINK*

#7

I wasn't clear, I guess

Bill Houghton, Sebastopol, CA

I didn't intend to disrespect the design; my intention was to point out that it's not BRAND new, but a development from earlier solutions to the same kind of problem.

I have a conditioned reflex - that comes off more than a little snappish - when I see something that claims to be the first time something's ever been done that way, when it usually hasn't. Automotive case in point was Ford's double-wall pickup beds, touted in the 1970s as a revolutionary new idea...that they apparently didn't notice Studebaker had done, better in some significant ways, in 1949.

I'm kind of entertained that this is clearly a hip solution to the furniture joinery problem, given that its antecedents are widely perceived as jury rigged solutions.