Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Mastech multimeters

Posts

Mastech multimeters

#1

Mastech multimeters

Charles in Mtl.

Does anyone know what these are like? I would go for a fluke except they are much more expensive.

Re: Mastech multimeters

#2

Re: Mastech multimeters

Randy Johnson

What are you using it for?

For simply checking for continuity or �close enough� voltage readings a cheapo from the local borg will do the job. I am partial to analog meters and that�s what most of the cheap ones are. Both of the two digital meters I�ve bought (One multimeter, one volt/amp meter. Both were moderately expensive) are now worthless because the LCD display is no longer readable.

Re: Mastech multimeters

#3

Re: Mastech multimeters

Charles in Mtl.

Randy,

My needs are just general voltage checks etc.....nothing requiring a great degree of precision. You are right.....the el cheapo model will meet my needs.

Re: Mastech multimeters

#4

Re: Mastech multimeters

Bill Howatt

Cdn Tire often has multimeters on sale for very good prices.

The cheapos that are being sold now would have cost a few hundred dollars in the past.

Bill

Re: Mastech multimeters

#5

Re: Mastech multimeters

Paul Cates - Henderson, KY

I had a Mastech MS8268. Used it maybe a half a dozen times...sometimes it was accurate, but other times it would show a reading that was obviously wrong. By the time I figured that out, the 1 year warranty expired. Tossed it in the recycle box and purchased a Sperry (5 year warranty) from the local Menard's. Lesson learned. If you just need basic readings, buy a $5 or 10 cheapo.