Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

grandchildren toys

Posts

grandchildren toys

#1

grandchildren toys

Jerry Gibbs

The grandkids are 2 and 5. In the past I have made them some toys that might become heirlooms, such as movable cranes and articulated pull toys. The kids have an overwhelming number of "modern" toys that make noises and move on their own. What I have made has been lost in the shuffle. Any thoughts for what to make for little kids these days? Jerry Gibbs

Re: grandchildren toys

#2

Re: grandchildren toys

Gerry In North Surrey

Interesting question, it made me stop and think of what has survived among the toys made for my kids/grandkids/great grandkids. The only thing that has survived and is still being used by one (of 4) grandsons is a fairly simple toolbox/stool that he uses to keep his tools and repair his mountain bikes. The lad is now finished high school and is working in a bike shop and still uses that plywood box with a lift out tray for work and takes it with him when he's out biking on the weekends. The granddaughters have had doll cradles, both full size and dolly size, that are now being handed down to their little ones. I think the most popular of the bunch has been the nanny cradles where the kid has a seat beside the cradle part. Rocking horses have always been 'must haves' and two of them have survived into the third generation. I think though, that we have become a throwaway society and there are few things that will survive a relatively short time let alone a generation. I'm looking forward to any other replies to your question, it should be an interesting thread.

Re: grandchildren toys

#3

Re: grandchildren toys

George Colonel's Workshop-Havertown PA

Good Morning Jerry,

The most successful toy I built for my grandchildren were bank trucks. There is a saw kerf in each truck top for coins. They are used, though not quite the same way as the plastic modern creations. However, they will become heirlooms, and I hope a fixture in their adult homes for their own kids.

George

Re: grandchildren toys

#4

Re: grandchildren toys

paul in AZ

If they are girls, it won't be too many years from now that they will need and use a nice jewelry box or two. Something they may keep for many years. Boys are another difficulty.

Re: grandchildren toys

#5

Maybe Not

George Colonel's Workshop-Havertown PA

Gopod Afternoon Paul,

I built two "stuff" boxes for two of my grandsons: nothing elaborate or fancy like the jewelry boxes my granddaughters have. I used white oak for the back, front and coopered lid, and stained with minwax "golden oak". The sides of the box and lid were from clear coated aromatic red cedar. They look nice enough for a bureau top, and masculine enough from the choice of woods.

George

Re: grandchildren toys

#6

Re: grandchildren toys

Barry Irby

I made a rocking horse for my Niece when she was five. It got a lot of use. When she was four, I made her a doll cradle, liked it, but not so much use. When she was six, I made her a toybox. A classic five board box with cedar in the bottom. I am twenty years older than my sister, her mother, and I made her one too when she was little and she still has it. I built them so that they turn into adult cedar chests later. I have done a bunch over the years and they are always a hit.

Re: grandchildren toys

#7

Hey Barry

George Colonel's Workshop-Havertown PA

Good Afternoon Barry,

that seems a real good idea. Do you have a picture or two you could post? Thanks.

George

Re: grandchildren toys

#8

Re: grandchildren toys

John E in SC

No grandchildren for me yet, but some of the things I have made for my own kids that have been "hits" are the more useful things rather than "toys". As some of the posts above, boxes for "stuff" and "treasures" are good for both boys and girls. (I'm talking about small, dresser-top type boxes.) Rocking horses are also good, and for my boys, I made wooden riding tractors that were pretty well used. I've also made some post-office-box-door banks. I hope all of those things will one day get passed on to grandchildren.

Re: grandchildren toys

#9

Of which are you speaking?

Barry Irby

I actually don't have pictures. I had three computer crashes, one after another and lost all my pictures. No need to shoot me, just send me a bullet and I will insert it manually.

The toybox was posted on WC prior to Christmas. Someone who actually knew how to search should be able to find it. I probably can't do it as I am a computer illiterate savage.

If it is the toybox, I can get my sister to take a picture and send it to me.

It was pretty simple. I had some 15" wide walnut boards that came from the family farm. I used a Leigh dovetail jig to dovetail the corners. I applied the bottom to the bottom of the box, with out a rabbet and then set it in a frame that had simple bracket feet. Used a Piano hinge and a lid support from Wood Craft and it worked perfectly.

Re: grandchildren toys

#10

Toys for grandchildren *LINK*

Lee Schierer McKean, PA

I've made numerous toys for my grandkids (age .5 to 9) and they must get played with because once in a while I get a toy back asking if I can fix it. Check out my website. All of the toys shown there are in the hands of my grandkids. I make most toys from "The Great All American Wooden Toy Book" by Norm Marshall. My granddaughter also has doll furniture that I made. I've made wooden blocks, car ramps for matchbox cars to zoom down, rubber band powered cars and 2 Liter water rockets.

Lee


Wooden Toys

Re: grandchildren toys

#11

Re: Of which are you speaking?

George Colonel's Workshop-Havertown PA

Barry, I'm referring to the cedar chest converted from the toy box. I think its a great idea, and fairly simple the way you describe it. I'd love to see a pix if not too inconvenient.

George

Re: grandchildren toys

#12

Re: Of which are you speaking?

Barry Irby

I found the picture I posted here. Went to search and looked up toy box. It came up as about the fourth one down. Posted on 12/21/2010.

I also saw the one you made with the Coopered top in 2006. Mine was much simpler. Yours had raised panels, mine was just boards. They were fifteen inches wide, but still just boards. They also came off the family farm, but that would only make it sentimental to my family. Other than the width of the boards, the only thing that makes it outstanding is the dovetail joints in the corners. I used a Leigh jig for those. Have to admit I am not a master of the Leigh Jig. What I learned from this project is that the pieces have to be cut with extreme accuracy. There is no fudge factor in the jig and resulting dovetails. If they are not accurate, the box will be cattywampus. I am sure you understand the cattywampus is somewhat worse than just plain wampus.

I used cedar closet lining to cover the bottom. I sealed the inside of the box and the plywood bottom with Zinsser Seal Coat Shellac in a rattle can first. I hate the smell of walnut. I am slightly allergic to it and have to wear the Pillsbury Dough Boy suit and a respirator to work it. Had to buy way more cedar than I needed because it came in a package.

Actually, I guess you know that the effectiveness of cedar as an insect repellent/insecticide is a complete myth. I talked to entomologists at VA Tech and they confirmed that cedar has no effect on insects. The reason cedar chests "work" is that you are supposed to launder of Dry Clean the clothes before you store them. No Moths/no moth eggs equals no moths. The chests are sealed so they can't get in. The guys at VA Tech thought it was wonderful and amazing that the entire cedar chest industry was built on a myth. The point it, You only have to put the cedar in there if you want to and would like to perpetuate the myth. OTOH, the cedar oils will ruin elastic. So, if you store your delicate skivvies in there, the next time you put them on, they may not be so sexy. They might just fall off and that could be very sexy or too horrible to visualize, depending....

Re: grandchildren toys

#13

PS, A couple of other thoughts

Barry Irby

Your box had a coopered lid. Hugely more work than the flat lid on mine and a completely different style.

One advantage (or not) to the flat lid is that you can sit on it. I have two people that have boxes I made tell me they sit on them every time they dress.

One of them admits there is just enough room on top of the box for their butt and the rest of it is covered with piles of magazines, so they never actually open the box. Would not have that problem with a coopered lid.

Re: grandchildren toys

#14

I'll Remember About Those Elastic Scivvies, Barry

George@Colonel's Workshop-Havertown PA

Re: grandchildren toys

#15

Having trouble believing this

Bill Houghton, Sebastopol, CA

I count THREE messages from the Colonel in this part of this thread, and not one pun! What has happened to our pundit?

Or are you just toying with us, Colonel?

Re: grandchildren toys

#16

Re: Having trouble believing this

Barry Irby

The Colonel takes his children and Grandchildren very seriously. Do you know anyone else who has them so carefully numbered? What most of you don't know is that the grandchildren are a subset of the children and they are numbered also, 1-1, 1-2, 3-1 and so on. The great grandchildren will be 1-1/A when they come along. I'm not military, but my son is and he said it made perfect sense to him.

Re: grandchildren toys

#17

A bribe may be in order...

John in NM

I just finished a glass of Paulaner double bock, maybe one of those would get the creative juices flowing!