Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Chairs/Tenons

Posts

Chairs/Tenons

#1

Chairs/Tenons

Tony - Memphis

I found some pics of the chairs I am building. (I posted a question about angled tenons a day or two ago.) The backs are angled at 2�, so they aren't square either. My next project is going to be 100% square and painted with lots of caulk!

Tony

The primary wood is makore. First time I've worked with it. I really wanted mahogany but it is too expensive these days. There are two of these chairs. They may look remarkably similar to the chair that Norm built. I used his plan a place to start. I looked at buying Phil Lowe's plans, but I figured between Norm's and lots of books, Internet stuff, etc., I could just draw my own. I'm still working on the arm design.


Here is a Sketchup model semi-finished...

Oh, here is one with the arm supports. They are tenoned into the rails and the front legs.


Re: Chairs/Tenons

#2

Ellis Walentine

Mighty nice shop you have there, Tony

Ellis Walentine

I can see how it must be pleasant to work in such a tidy looking place. Getting back to your joinery, this is a project where loose tenons can be a big help, rather than trying to get those 2� shoulders just right and the tenon headed in the right direction.

Can't wait to see the finished chairs.

Ellis