Dispozablade-for jointer
Kelly Handwerk
Has anyone used Dispozablade system on your jointer to set your blades? I would love to know how you like this system. Thanks.
Knowledge You Can Build On — Est. 1998
Dispozablade-for jointer
Kelly Handwerk
Has anyone used Dispozablade system on your jointer to set your blades? I would love to know how you like this system. Thanks.
Re: Dispozablade-for jointer--!NOT
Dave (PacNW)
For another $100.00 or less, you can upgrade to a spiral(carbide insert) head. It cuts smoother and does not chip in twisted grain. Check out Grizzly Tools, they have three different MFG's heads in their catalog.
Advise worth What It Cost, 
Dave (PacNW)
Re: Dispozablade-for jointer--!NOT
Bart Goldberg
Agree with the advice to go with a spiral cutterhead. I too was looking to upgrade my DJ-20, and the cost difference between the dispos-a-blade and the spiral cutrterhead was more than worth the $100.00.
Bart
Don't Do It, Don't You Do It!
BobS
I have one, you are welcome to use it and then take out like I did and replace with a spiral cutterhead. It is no easier to change blades and they don't last long anyway so changing becomes for frequent which makes it twice as bad.
Bob
I like them
Ellis Walentine
...compared to my old jointer knives, because you never have to reset the blade height jack screws. This makes blade changing much faster. In fairness, I don't own any helical cutterheads, but I thought they cost a lot more than $100 over the Dispos-A-Blade price.
Ellis
FYI-Current Prices
Dave (PacNW)
The 6" disposablade is currently $222.75---6" spiral head (at Grizzly) $270.. 8" disposablade $254.01---- The 8" spiral head $380.00. Last year both prices were 15% higher.
Dave(PacNW)
Re: FYI-Current Prices
Kelly Handwerk
Thanks for all of the info!!!!
KH