We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
Saw this on Craig's list. I have a couple of bowling lane work benches. They work well. Sometimes folks are looking for these so I thought I'd pass it along.
If you do buy a section, be sure that there are lateral (side to side) slats nailed to the bottom of the section every 2-3 feet. Without this support, the section may flex, curve or bow laterally, which will crack the top finish. It looks like a solid slab but there is a LOT of flex possible if it is not reinforced.
Usually the bottom of the lane section is irregular (not flat from board to board) so it would be a good idea to rout some dados side to side to provide a stable support from a common reference thickness for the slab when you build the legs/frame supports.
Another thing to consider is that the boards are glued and NAILED (lots of nails) together, so drilling bench dog holes almost guarantees that you will hit nails every time. Choose a tough and disposable drill (probably several bits will be needed) and plan on some holes wandering off couse from vertical.
A meaty hardwood surrounding frame will allow face grain attachment points for the vise(s) of your choice.