Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Bow- Front Door-Missing Curved Glass

Posts

Bow- Front Door-Missing Curved Glass

#1

Bow- Front Door-Missing Curved Glass

George Colonel's Workshop-Havertown PA

Good Morning Friends,

My SIL brought me a bowed door to her very old oak curio cabinet. The glass is long gone, and a glass replacement is cost prohibitive. The door is approx 20" square, and the bow itself is about 3-3 1/2". She asked about some sort of clear plastic which could be bent to conform to the curvature. Any alternatives/recommendations/sources? Thanks.

(I wonder who she has in mind to do the work!)

George

Re: Bow- Front Door-Missing Curved Glass

#2

Re: Bow- Front Door-Missing Curved Glass

Barry Irby

Some of the plastic sheeting may be the thermosetting type, meaning it is subject to being softened by heat and curved. I dondon't which plastics they are but someone here may know.

If you could get very thin plastic you may be able to just flex it and insert it into the frame.

I would have thought you could find curved glass panels relatively reasonably. Just don't know how many different sizes and radii are available.

Wonder if you could slump a piece of single strength in the oven?

Re: Bow- Front Door-Missing Curved Glass

#3

Re: Bow- Front Door-Missing Curved Glass

Keith Newton

If that will fit in your wives oven, you can do it. Get the wax that changes color to indicate temp.

Re: Bow- Front Door-Missing Curved Glass

#4

Clint Searl

Re: Bow- Front Door-Missing Curved Glass

Clint Searl

Acrylic (Plexiglass) can be heat formed quite easily, but wants to spring back slightly on cooling. Warm it in a preheated 300 degree oven till it's flexible and bend it over a form with a bit tighter curve than final shape. I've done 1/4" Plexi to a 4" radius by hand that way. The 1/8" stuff at the borg would probably work.

Clint

Re: Bow- Front Door-Missing Curved Glass

#5

Re: Bow- Front Door-Missing Curved Glass

Howard

George

Did she try Van Dydes Restorers? They carry a lot of radius glass and can trim it to size if a stock piece does not meet her needs.

Howard

Re: Bow- Front Door-Missing Curved Glass

#6

Re: Bow- Front Door-Missing Curved Glass *LINK*

Lee Schierer McKean, PA

I did a quick search for curved glass and located this site that seems to have decent pricing for curved glass pieces. By the time you purchase the plastic and do the bending you'll have at least the same amount into the project depending upon the size of the piece you need. The up side of glass if barring breakage it will last several lifetimes. Plastic will start to scratch at the first cleaning and get progressively worse over time. Sadly acrylic (plexi glass) is not much more break resistant than glass.

Make sure when you talk to a glass supplier they know this is for a china cabinet not a people door. They can only sell tempered glass for people doors. A curved piece of tempered glass would indeed be costly.

Lee


Curved glass

Re: Bow- Front Door-Missing Curved Glass

#7

Re: Bow- Front Door-Missing Curved Glass *LINK*

Dick Coers

Another vote for Van Dykes. They have some on sale right now. If you want to use plastic, use polycarbonate. We bend that thin stuff in our sheet metal brake at work. You can bend 1/8" material, to a 90 degree angle, cold. Get it thick enough, it's bullet proof. It's actually soft enough that you can pull a curl with a hand plane, so special handling while cleaning.


Van Dykes glass

Re: Bow- Front Door-Missing Curved Glass

#8

Re: Bow- Front Door-Missing Curved Glass *LINK*

del schisler

have you tried these people ??


http://www.dundyglass.com/Bent_Glass/bent_glass.ht

Re: Bow- Front Door-Missing Curved Glass

#9

"I wonder who she has in mind to do the work!"  *LINK*

Bill Houghton, Sebastopol, CA

Obviously, Plastic Man.


img

http://en.wikipedia.org/wiki/Plastic_Man

Re: Bow- Front Door-Missing Curved Glass

#10

Look for scratch-resistant acrylic

Bill Houghton, Sebastopol, CA

If you use acrylic, look for the scratch-resistant variety. It's scratch-resistant on one side only, but even that should help.

UV is also an issue - I don't know if acrylic is UV-resistant.

Re: Bow- Front Door-Missing Curved Glass

#11

Re: Bow- Front Door-Missing Curved Glass *LINK*

Bob Lemon

George, This outfit has been around for a long time and used to carry a big stock of pre-bent glass.


pecoglassbending

Re: Bow- Front Door-Missing Curved Glass

#12

Ellis Walentine

Re: Bow- Front Door-Missing Curved Glass

Ellis Walentine

Ian Kirby tells me there is a company nearby that will make any size and curvature of glass for a reasonable price. I'll let you know tomorrow what I find out.

Ellis