Stripped! - PM 701 Mortiser Hub
Tony - Memphis
I was making mortises in my chair backs this weekend (1/4" mortises 1" deep in poplar) and all the sudden, the handle no worky?!? This is a PM 701 mortiser I bought in '06. turnes out the handle fits into a hub with internal splines and the thing was completely stripped. When I took it apart, I got a bunch of pieces of metal in my hand. Weird thing was that there didn't seem to be enought metal to make as many splines as what should have been in there. Very strange. I have a new one on order (by the way, the PM parts order site is down - they are working on it). I wasn't pushing very hard either. Doesn't take much to get a 1/4" mortise in poplar. I've use this thing on much harder/bigger mortises and it never even flinched. I may package it up and sent it back to them to look at. I wondered if I didn't have it fully engaged? but it seemed to be slid in as far as it could go. I dunno. Meanwhile, I'm stuck until it gets here. Went ahead and threw in a few extra bucks for 3 day shipping.
Tony



