Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Famowood - Sorta hardened?

Posts

Famowood - Sorta hardened?

#1

Famowood - Sorta hardened?

David Lykins - guitardude - Dallas GA

I opened up what I thought was a good can of Famowood only to find that it was fairly hardend and not plyable. I was thinking that you can add something like paint thinner, or mineral spirits to get it back to a putty like consistancy? Is that true? Seems to me I've done it before.

Any help is greatly apprecaiated.

Thanks!

Re: Famowood - Sorta hardened?

#2

Re: Famowood - Sorta hardened?

mdclor

The actual product is Famowood Filler Solvent. The ingredients are acetone, methyl ethyl ketone and petroleum distillates.

HTH,

Merle

Re: Famowood - Sorta hardened?

#3

Re: Famowood - Sorta hardened?

Ken Oakley-Sunny St. Cloud, Fla

I just add some MEK, (Methyl Ethyl, Ketone), and mix. works great

Re: Famowood - Sorta hardened?

#4

Moses Yoder

Re: Don't add mineral spirits!

Moses Yoder

If you add mineral psirits to a wood filler it will never harden. DAMHIKT. You can add regular laquer thinner to it and it will work. Some Famowood products are water based now and you only need to add water; make sure you read the label before adding anything.

Re: Famowood - Sorta hardened?

#5

not paint thinner

Bill Tindall

I think lacquer thinner works and probably acetone will work.

Re: Famowood - Sorta hardened?

#6

In addition.....

Bill Tindall

It takes a long time for the solvent to penetrate the hardened stuff and redissolve it. As I recall I added lacquer thinner to the can, sealed it up and let it set for several days before it was back to original condition.

Re: Famowood - Sorta hardened?

#7

Bill is right....

Barry Irby

I ahd some of the solvent made for it for a while, but I have also used lacquer thinner and Acetone.

I crumble up the contents of the can and pour in the thinner and then cap it for a few days. You can hurry it by letting it soake a while and stirring it a bit.

Re: Famowood - Sorta hardened?

#8

Re: Famowood - Sorta hardened?

Bob Lang

The proprietary solvent works best, but it is expensive. I think as Bill said it's part acetone, part MEK and part lacquer thinner. Any of the three will soften the hardened Famowood, but sometimes it becomes a gooey, sticky mess, depending on what solvent you use. The cynic in me says they engineered this into the product to make you buy their solvent, but it likely keeps it from floating away under a lacquer finish.

It can take a while to unharden stuff in the can, my usual method was to pour in some solvent, put the lid back on and come back in a few hours to see if it could be stirred up. No experience with the water-based version.

Bob Lang

Re: Famowood - Sorta hardened?

#9

Bart Goldberg

Re: Famowood - Sorta hardened?

Bart Goldberg

I have found that using just straight Acetone works fine to soften up famawood and is cheap and readily available at your favorite paint store.

bart

Re: Famowood - Sorta hardened?

#10

Re: Famowood - Sorta hardened? *LINK*

David Yoho

During the time I used Famowood I used acetone to rejuvenate it. I've since abandoned Famowood for what I think is a much better filler. I've been having excellent results with Timbermate. One nice thing is if it dries out in the container, you just add some water and it's new again. How easy is that?!!

I've included a link to Timbermate's Website below. Several places like Woodcraft carry it, so you shouldn't have trouble finding it. It's just so much easier to work with than Famowood and it works better.

David


Timbermate Wood Filler