We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
I have an old Central Machinery three wheel bandsaw. The wheels are 6 1/2 " dia. Does anyone know where I can get new tires for this machine? The saw is very handy for small projects and I'd like to keep it going.
John, this is straight from the hip: If you can't find a real tire, try using a section of a pneumatic tire tube (assuming they still make them). If you want a crown on the wheel, you can probably build it up with tape or something before you stretch the tire onto the wheel.
I haven't ever attempted this particular fix, but I've seen some pretty rough-and-ready bandsaw fixes over the years, and this wouldn't be too far-fetched at all. I've had bandsaws that ran fine with plain flat rubber tires, so I don't see why it wouldn't work. I use spray adhesive to keep the tires from slipping.