Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Sealing Sandstone OT

Posts

Sealing Sandstone OT

#1

Sealing Sandstone OT

Barbara Gill

Someone gave us a sandstone sign for our store; what is the best product to use to seal the stone?

Re: Sealing Sandstone OT

#2

Re: Sealing Sandstone OT

John Veerkamp

Barb,

Tile and flooring stores carry sealers for sandstone, Marble, granite and other types of stone. Another source would be a outdoor stone and patio materials supplier.

John

Re: Sealing Sandstone OT

#3

Clint Searl

Re: Sealing Sandstone OT

Clint Searl

Assuming it's not gonna be walked on or subjected to any kind of dirt, it really doesn't need a sealer. Cemetaries are full of 100+ year old untreated sandstone markers that look pretty good.

Clint

Re: Sealing Sandstone OT

#4

Agree....

John in NM

Shouldn't be any need on a sign. Most products are going to be intended for indoor use in any case and would probably not stand up to the UV exposure outside.

Re: Sealing Sandstone OT

#5

Ellis Walentine

To seal or not to seal

Ellis Walentine

Hi Barb,

I would agree with the others that you don't need to seal the stone, but you might want to saturate the color or deepen it, in which case there's no particular reason not to use some kind of product on it. Waterlox, oddly enough, was originally formulated for use on exterior stonework. It will soak into the stone and darken the color. There are also stains available for use on stone and concrete that will hold up fine outdoors.

I'd think of this as an opportunity to change the appearance, if you think it would improve it.

Ellis

Re: Sealing Sandstone OT

#6

Re: To seal or not to seal

Barbara Gill

If Waterlox would work then so would the Velvit Cabin and Deck Finish. I have some clear and it would probably do the trick.

Thanks all for the information. We don't know what we are going to do with this chunk of sandstone. The stores name is Something Different. If we use the sign outside I doubt that it would be there one night before someone would steal it. Carrying it inside each night would be a chore as it is fairly heavy.

Re: Sealing Sandstone OT

#7

Clint Searl

Re: To seal or not to seal

Clint Searl

You could make your own environmentally correct finish by disolving beeswax in turpentine and adding natural pigment powders to tone it. It could turn into one of those little projects that helps one avoid doing real work.

Clint

Re: Sealing Sandstone OT

#8

Hadn't thought of that...

John in NM

If theft is a problem, graffiti probably is too, so perhaps sealing is in order for that reason or with all the handling moving it in and out.

As Ellis says, Waterlox will work and give it a darker almost wet look. Thinned spar varnish would do the same. If you don't want to alter the look, there are water based urethanes that will fit the bill as long as you don't over do it. They start to have a milky look with too many coats - a couple is really all you need. The one I've used for tile and sandstone floors is Jasco - but it seems similar to thinned Varithane diamond finish to me.

Have you thought of putting it on wheels for ease of moving? Maybe a wheel barrow type of arraignment?

Re: Sealing Sandstone OT

#9

Re: To seal or not to seal

Barbara Gill

I have an old planer that is from the steam belt driven era. We use an electric motor to power it but the head and feed is still driven by big wide belts. I mix turpentine, rosin and beeswax to make a belt dressing.

My main goal is to prevent anything from staining the stone. I think I will use the clear Velvit CDF to seal it since I have it.

Re: Sealing Sandstone OT

#10

Ellis Walentine

Here's a project for you...

Ellis Walentine

Hang the stone from a little crane track that goes from inside the store to outside. You could bring it in at night by a little servomotor and a cable or even one of those old long handles shaped like a brace that they used to use to roll up awnings.

Of course, you might not want your store to be incognito at night. In that case, leave the sign there, but padlock it to the support somehow.

Ain't design fun?

Ellis

Re: Sealing Sandstone OT

#11

Re: To seal or not to seal

FredD

Any concrete sealer will do the trick . It is formulated for that purpose and eliminates experimenting .

It is available at all concrete batch plants and most hardwares worthy of the name.

FredD

Re: Sealing Sandstone OT

#12

Re: Here's a project for you...

Barbara Gill

LOL I don't think I neen any more projects.

Re: Sealing Sandstone OT

#13

Clint Searl

Re: To seal or not to seal

Clint Searl

That mix is used by artists working in encaustic.

Clint

Re: Sealing Sandstone OT

#14

Re: Sealing Sandstone OT

Gary Smyth


I've a similar concern. This is very soft stone from Indonesia. A bump will cause a deep depression or even crumble the stone. It feels like sandstone but I think it is softer. It needs to be sealed to limit dust and provide some strength. I can live with some darkening, but I want to still see the grain of the stone. Will the solutions proposed here help? If not, where else might I go? Thus far I've been only to marker and headstone places. The library has not helped, nor the art department at Carnegie Mellon U. or the Carnegie museum people who want paid. A light gray relatively even in shade is what I'm searching for.

Re: Sealing Sandstone OT

#15

Clint Searl

Clear water borne poly

Clint Searl

Re: Sealing Sandstone OT

#16

Can you get a small chunk to test on?

Nathan

Re: Sealing Sandstone OT

#17

Ellis Walentine

Hue, value and sheen

Ellis Walentine

These seem to me to be the main variables here. When you put a finish on stone (or wood for that matter), it may or may not change the hue (neutral gray, cool gray, warm gray, some other hue, etc.) because of the tone of the finish itself. In the case of pigment stains, they change the hue through a combination of solid pigments and the vehicle. Products also vary widely in how much they darken the object (value). Some go on dark and dry invisible; others darken it perceptibly (as well as possibly changing the hue). Then there's the question of surface sheen, which will vary with the product and the number of coats. On soft porous stone, most liquid products will be absorbed readily, so there won't be much change in the apparent surface texture or quality. But, if you add more coats, different products will build on the surface in varying degrees, producing more of a sheen or luster with each coat.

Clint's idea of a water-borne poly sounds good to me, because it won't appreciably darken the stone or modify the natural hue (at least the brands I've used). It is also quite thin, so it will absorb well, but after the initial sealer coat, you're likely to see a progressive increase in sheen.

Commercially available concrete and tile sealers do a great job of sealing the surface and protecting it from moisture and staining, but many of them darken or change the hue or sheen of the stone or tile. A lot of customers want this effect, but you may not. That's why I'd suggest experimenting, especially on valuable pieces that you don't want to mess up.

Ellis

Re: Sealing Sandstone OT

#18

Re: Sealing Sandstone OT-EEEEK!!!!

Justin Szeliga

How about getting a silicone sealer made for masonry & stone, water or solvent based, instead of using techniques that will greatly change stone color. Silane/siloxane is the stuff I've seen about & it does a good job of protecting stone, brick, mortar & concrete.

Just Google silane/siloxane & you'll find plenty.

Peace

Justin

Re: Sealing Sandstone OT

#19

Thanks Everyone!

Barbara Gill