Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Anyone experienced with CNC Router kits?

Posts

Anyone experienced with CNC Router kits?

#1

Anyone experienced with CNC Router kits?

Ron Bauman

I have zero contact with CNC technology. However, I have a couple of jobs that are repetitious and time consuming and would benefit from the use of a CNC Router (I think). There are some kits on the internet that would make this feasible both sizewise and financially. I need to have a 16"x16" working area, a bit larger is OK, but not smaller. My son is a computer whiz and has offered to help me program so that area is covered, but I need to know what's worth looking at or not. TIA I will look from time to time for responses. Oh yes, I think I only need XYZ axis', again TIA

Re: Anyone experienced with CNC Router kits?

#2

Moses Yoder

Re: Anyone experienced with CNC Router kits?

Moses Yoder

There are a numer of router shops in this area that will route custom parts. All they need is a cad file to run the parts. I think especially for just starting out with cnc, you might be better off getting a local shop to mill the parts for you. The shops in this area usually only charge a dollar or two per part.

Re: Anyone experienced with CNC Router kits?

#3

Re: Anyone experienced with CNC Router kits?

Neal in San Jose

If you are anywhere near the San Francisco Bay area, The Sawdust shop in Santa Clara rents time on one, and has classes on setting it up.

Re: Anyone experienced with CNC Router kits?

#4

I'm near Milwaukee, Wi

Ron Bauman

Re: Anyone experienced with CNC Router kits?

#5

Re: Anyone experienced with CNC Router kits? *LINK*

Bob Lemon

Ron, here is a good place to start. ShopBot has been around for quite a while and there are a lot of owners. The link will take you to their main site, from there you can go to other related sites. I'm curious as to what type of cuts you require and if a pin router would handle the work for you?


http://www.shopbottools.com/

Re: Anyone experienced with CNC Router kits?

#6

Re: Anyone experienced with CNC Router kits? *LINK*

Dick Coers

Ron,

I run a 5 axis, 5'x10'x3'z Motionmaster for a day job. For anyone to make a recommendation, they will need to know; the material you want to cut, the thickness of material, speed you want (maybe parts per hour?) and an idea of your budget. You will need to consider the cost of software too. You need a CAD and CAM software, unless your son is really good and he can program from scratch with G and M codes. cnczone is a fantastic site for researching everything about cnc.


cnczone

Re: Anyone experienced with CNC Router kits?

#7

Re: Anyone experienced with CNC Router kits?

Larry

Check out this site, http://joescnc.com/. Good grope of guys!

Re: Anyone experienced with CNC Router kits?

#8

Thanks! Stuff to chew on.........

Ron Bauman