Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Water filter and/or oil injector for brad nailer?

Posts

Water filter and/or oil injector for brad nailer?

#1

Water filter and/or oil injector for brad nailer?

Tom Dunlap

I bought a cheap brad nailer and now its time to plumb the tool.

To keep the nailer healthy am I better served having an oil injector close to the tool, maybe on a short hose-whip, or having a water condenser/filter at the end of the air hose near the tool?

I already have a filter/condensor plumbed onto the air compressor lines as they come out of the tank.

Tom

Re: Water filter and/or oil injector for brad nailer?

#2

Rick L

Re: Water filter and/or oil injector for brad nail

Rick L

I wouldn't bother with either oiler or filter. I've been using air tools for 35 years and spent 8 years as a tech repairing air tools. The problem with oilers is folks forget to refill them. You are better off just putting in a few drops every day you use it. We sold Hitachi, Senco, Airy, Paslode and several other brands to pros who worked their tools hard and never had problems with oil or water issues. Worn out seals and broken drivers were the common problems. On a cheap gun it's probably cheaper to buy a new one when it dies. Worn o-rings can be compensated by using a bit of dental floss to build up the o-ring in a pinch.

Re: Water filter and/or oil injector for brad nailer?

#3

Re: Water filter and/or oil injector for brad nail

Bill Howatt

I just oil when I pick up the nailer and feel that it needs it. There is no need to oil it everytime if it only drove a few brads after the previous oiling.

Bill

Re: Water filter and/or oil injector for brad nailer?

#4

Moses Yoder

Re: I agree

Moses Yoder

I have a water trap a little ways away from my compressor and get very little moisture in my air hoses. If you add an oiler into the line, you get oil inside the line and you cannot used oiled lines for spraying finish. A few drops of oil in the tool every once in while is plenty of oil.