Simple project gets REALLY time consuming
David Lykins - guitardude - Dallas GA
So I've been unemployed for over a year now, and I got comissioned to do some display shelves for a couple of guys I used to work with. Unfortunately my first mistake was pricing mine (the hand made one) at the "retail" price of the Chinese made one, and have found out that my pricing is WAY too low for the amount of work. Next problem was eveything had to be planned to 1/2" thickness, not a big deal until I realized I had to move my planer and work table just so I could plane 8' boards. I got all the peices cut for three units, and realized that I had to make a jig to space the shelves evenly for glue up. Anyway, I've finally got three of them glued up and decided to get some more wood. So, I thought I'd hit Peachstate Lumber instead of HD to see if I could get a better deal on the wood.....Duh....YEP. So got the boards home and realize that now I've got to move my planer into the garage because these boards are 12' and not 8' in lenth. Well to move my planer I had to make sort of a rolling stand to get it into the garage as I couldn't move it myslef.
So, got the planer and my DC rolled into my garage, started planing and the DC filled up pretty quickly, and to add to that my planer got jammed full of chips, so I had to remove the DC shoot, dig out the wood chips, clean off the rollers on the DC and finally got back to bussiness.
Man, how can something so simple as making a hand full of shelves be soooooo time consuming.
Anyway, I've attached a pic of the original shelf (on the left) and my shelf (on the right). Fortunately my clients have seen this picture and were very impressed with my work. Now if I can ONLY find a stain that will come close to matching the original I'll have it made.




