Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Did I use up this bolt?

Posts

Did I use up this bolt?

#1

Did I use up this bolt?

Barry Irby

This is one of the bolts that used to be holding my deck railing.

The post had split and I just ripped it off. I was able to remove only one of the bolts on the whole deck, the rest of them snapped. did I get all I was going to get, or should I have waited a while?


It was a 3/8" by 6" electro galvanized lag bolt.

Re: Did I use up this bolt?

#2

Confirmation

Bill Houghton, Sebastopol, CA

I think that bolt is nearly at the end of its useful life.

Electro-galvanizing, in my opinion, is about as useful as hanging a zinc amulet near a bolt. Go for hot-dipped or stainless; I prefer hot-dipped, because I've snapped off too many small-diameter stainless screws that, had they been plain steel, would have been fine.

Re: Did I use up this bolt?

#3

Your money's worth

Lee Schierer McKean, PA

It appears you got full value of use for your bolt investment. Last summer while resurfacing and redesigning our back deck I noted that 6 of the eight hot dipped galvanized bolts I had to remove broke off instead of coming out of the support timbers. I replace all the supporting bolts in the frame as a result of this trend to break. Now I walk without worry on my deck.

Lee

Re: Did I use up this bolt?

#4

Re: Did I use up this bolt?

FredD

A good example of why Galvanizing is not forever including all types.

Kind of like Stainless Steel sinks which many believe are just that , but they can rust and stain and many given the chance will, depending on amount of Nickle content.

The hint is in the name, Stainless does not mean stain proof.

FredD

Re: Did I use up this bolt?

#5

Re: Did I use up this bolt?

Ray Carson - Lawrenceville, NJ

That bolt is all decked out. :)