Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Retaining ring pliers

Posts

Retaining ring pliers

#1

Retaining ring pliers

Gary Smyth

This day I have broken two sets of right angle circlip (some call them retaining ring) points . Both of the plier sets were stamped metal, external pliers and the points interchangable and hardened -- both by name brands. The points would not hold and the clip (about 1/16" thick and fit a 1/2" shaft) pretty much refused to open even with a two hands squeeze. I know that I applied over 20 lbs of squeeze and maybe a lot more. I definitely need right angle points to reach the clip.

Question: Anyone have a picture/recommendation of "good" retaining clip pliers? Names don't matter, working does. Is there anything I should look for in a circlip plier? Ebay and the web shows individual and sets of pliers from $6 to over $75. I hate to spend money on tools I know little about, but in my book the stamped metal pliers are not good for a heavy spring clip. I'm looking for something that will work and not send a $4 clip into the next county.

The big boxes are useless and it's Sunday with a holiday tomorrow. Other sources? Auto stores? I need something that will fit the ring holes and hold onto it while exerting substantial pressure. Aircraft guys, machinists -help!

Re: Retaining ring pliers

#2

Re: Retaining ring pliers

Fred Davis

Auto stores should have a selection, name brands like Snap On should give you no trouble , mine is a stamped metal hardware store item and it hasn't broke yet.

FredD

Re: Retaining ring pliers

#3

Re: Retaining ring pliers

Barry Irby

I bought a set at an Auto Parts store for less than $20. They are not stamped and have interchangeable "Jaws". One pliers squeezes and the other expands. I have not broken them, but have only used them once or twice to remove a circle clip from a lathe chuck. They look pretty sturdy.

Re: Retaining ring pliers

#4

Re: Retaining ring pliers

steve mackay

Had these GI issue for years and years. "TRUARC" made by WALDES. With my ham fist the adjustable "stop" keeps me from shooting rings into next week. I think I've filed / sharpened the points a couple times and they still work well.

Re: Retaining ring pliers

#5

Re: Retaining ring pliers

Stuart Hough

Go to Lowe's and check out the Klein Tools section. They have a set that is very strong. Price is not too high.

Re: Retaining ring pliers

#6

Definitely auto parts store

Bill Houghton, Sebastopol, CA

although the recommendation of Klein pliers, if your local big box store carries them, is a good one.

Auto parts stores cater to mechanics, probably the most frequent users of this particular tool. K-D is a common brand; NAPA has its own line, I think. Go to a real auto parts store, not a discount one.

Do NOT get the kind that have one set of pliers that do inside and outside clips. These will frustrate you endlessly.

Re: Retaining ring pliers

#7

Re: Retaining ring pliers *LINK*

Virgil Johnson

I have a set of "Hi Tech" snap ring pliers which are internal and external in the same handle. Push a couple dowel pins and they convert to the needed application. These have held up well in an machine shop environment. Check your local bearing supplier or industrial supply house.


Snap ring pliers

Re: Retaining ring pliers

#8

Re: Retaining ring pliers

Andy Lincoln,in Dearborn,MI

Steve,

Nice Drive By Gloat on the In-n-Out Burger Tee Shirt.

Since moving back to the Midwest form a year in California ,some 20 years ago...I still miss In-n-out and Tommy's in L.A....But atleast we have Lafayette and American Coney Islands(the world's best hot dog with chili,mustard and onions)

Andy

Re: Retaining ring pliers

#9

Too much force

Phil Joines Krum,Texas

If you have to use that much force the ring is probably rusted into the groove. Use some penetrating oil and a small cold chisel to loosen it. You'll probably need a replacement.