Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Gorilla Glue AAARRRRGGG

Posts

Gorilla Glue AAARRRRGGG

#1

Gorilla Glue AAARRRRGGG

iew

I didn't follow the rules and got some Gorilla Glue on my hands. Got a few stains. How do I get rid of this stuff on my hands?? Bottle says can cause gastro-intestinal blockage????? Maybe even the hear break of psoriasis?? >(

Re: Gorilla Glue AAARRRRGGG

#2

you will suffer "Black Hand"

Bill Tindall

It will accumulate dirt, your hands will be black and loose women will avoid you. If you are among the unlucky few you will become sensitized to isocyanate and the next time you get some on your hands you will break out. with a rash. Before it cross links, which happens fairly quickly, it can be removed with solvents like acetone. Once it cross links nothing will dissolve it, but it wears off quickly.

The fact that this stuff is prepolymerized to a fairly high molecular weight renders it essentially non-toxic, so don't worry about that issue in spite of the dire label warnings.

There is almost nothing that this glue is best for. That fact that anyone buys it is a triumph of marketing.

Re: Gorilla Glue AAARRRRGGG

#3

Re: Gorilla Glue AAARRRRGGG

del schisler

when you first get it on your hand wash with water It will come off After it set up nothing will get it off or breake it down I use the white gorilla glue It doesn't foam like the syrup kind does the same spplyes to getting it off go here and read Doesn't look good I been their done that also

http://www.google.com/search?hl=en&source=hp&q=gorilla+glue+wash+it+off

Re: Gorilla Glue AAARRRRGGG

#4

Removing the Uritain Go-Rilla

Mark Mandell - Gone Round In Jersey

Is accomplished with some 150 grit sand paper followed for some good hand lotion like Cornhuskers, Aloe, of Vasilene IC. Sands quite easily, actually. The lotion is to help the "scuff" heal. I suppose you could also do mineral oil or even water and SiC papers for "wet sanding".

I used a lot of it wbw, until the joints started letting go.

Re: Gorilla Glue AAARRRRGGG

#5

Re: Gorilla Glue AAARRRRGGG

John Lucas

it will not come off with anything I can find. The same is true with GReat Stuff foam for insulation. Formula's must be similar.

I have not found anything that Gorilla glue will do that either epoxy or yellow glue won't do as well or better. Epoxy is waterproof, you can mix it to different thicknesses and drying times and it cleans off your hands easily with alcohol. Yellow glue holds everything else that is long grain to long grain and doesn't have to be waterproof. It also cleans up easily.

Re: Gorilla Glue AAARRRRGGG

#6

Re: Gorilla Glue AAARRRRGGG

Dave Bair, Eaton Rapids, MI

Re: Gorilla Glue AAARRRRGGG

#7

It's great for....

Neal in San Jose

It is the best thing I've found for pushing complicated glue-ups apart in ways you didn't think to clamp, and always just after you are satisfied with the assembly and leave the shop for the night. The next day will be the only time it shows any strength at all, when it will resist all of your efforts to salvage the assembly.

Oh, it is also great at hardening up in the bottle, thereby wasting your investment.

Can you tell I don't use it any more?

Re: Gorilla Glue AAARRRRGGG

#8

Re: Gorilla Glue AAARRRRGGG

Gary Smyth

Just let it wear off. Wear nitrile or latex exam gloves. Get the lightly powdered as they're easier to put on after washing your hands. Very tight and you will be able to work delicate parts. Sam's, Costco, Harbor Freight. Box of 100 about $9. If you haven't tried them give it a shot. After glueing, peel them back inside out and toss. Do not use latex if you suspect you have a latex alergy. Nitrile (blue) are better around some chemicals too as they are less prone to dissolving..