Bed Frame
mdclor
The arrival of GD#2 necessitated a new bed for GD#1. LOML#2 sent me a picture and I took it from there. However, I wish to thank Andy Wright for his design assistance.
The wood is QSWO and the joinery is M&T for the head and foot board rails. I used 3/8" dowel pegs to attach the spindles to the rails. I used bed rail fasteners for the side rails. The panels are white oak ply since they will be mostly hidden by the mattress and pillows. The finish is Minwax walnut stain with 2 sprayed coats of Target WB shellac and 4 coats of clear top coat.
I hadn't done a complete bed frame before so there were a number of learning opportunities for me. One of which was figuring out how to attach the spindles to the curved rail and having the spindles meet the curve of the rail.
As usual with my projects and with my photographic abilities, there is a lot of room for improvement, but overall, I am okay with this project. However, Tommy and Chico have ABSOLUTELY nothing to fear from me.
Thanks for looking.
Merle



Nice work. I especially like the finishing schedule and visual presentation.



