Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Tall Tea Table in Black Walnut

Posts

Tall Tea Table in Black Walnut

#1

Alan Young

Tall Tea Table in Black Walnut

Alan Young

Here is a piece I completed a couple of weeks ago. Although we drink very little tea in our house-the table is in the style of a Period Tea Table-although a tad taller in proportion than what was common-hence it's title-Tall Tea Table...


The table is made from Black Walnut, Walnut Veneer, Maple inlay and Sapele for the top edge banding.





The finish for the tri-pod base and pedestal was Minwax-Red Mahogany Stain with a Gloss alkyd varnish. The top was stained with the Red Mahogany-Then wipe clean quickly in the top surface only-I left the stain set in Sapele edgbanding. The top then received a semigloss Tung Oil finish (Formby's I think)



Thanks for looking

-Alan

Re: Tall Tea Table in Black Walnut

#2

Re: Tall Tea Table in Black Walnut

Thomas Skaggs, Foothills of Mount Level

Very nice. Will this stay in your private collection or is it for a client? Very nice tea table....but no drawer for crumpets? :-)

Tom

Re: Tall Tea Table in Black Walnut

#3

Re: Tall Tea Table in Black Walnut

Fred Davis

If you think it is a little tall for a Tea table , how about for a plant stand?

Nice any way you look at it, btw who did your base? ;-))

FredD

Re: Tall Tea Table in Black Walnut

#4

Re: Tall Tea Table in Black Walnut

Ken Oakley-Sunny St. Cloud, Fla

The British have tradition called High Tea. This should fit right into that tradition.

Aslo I saw one just like it on Facebook, earlier today.

Re: Tall Tea Table in Black Walnut

#5

Very nice!

John in NM

Great work Alan, looks like a good fit with your decor too.

Re: Tall Tea Table in Black Walnut

#6

Alan Young

Re: Tall Tea Table in Black Walnut

Alan Young

Hi Tom-

No crumpets but it did hold a beer bottle the other day!

Staying in the house for now. It started off as a lamp-The pedestal is hollow. I have a second turned section that was to be place on top of the "disk" with fixture at the top and the chord running all the way through. I just didn't look right as I progressed. So I left it as a table. I may still finish of the other turned section as a lamp for this table...

Re: Tall Tea Table in Black Walnut

#7

Re: ATerrific Tad Taller Tea Table in Black Walnut

George Colonel's Workshop-Havertown PA

Good Afternoon Allan,

That is a lovely piece in every respect. Although it may be a tad taller, the pleasant proportions would bring charm to any room. Nice job.

George

Re: Tall Tea Table in Black Walnut

#8

Alan Young

Re: Tall Tea Table in Black Walnut

Alan Young

Hi Fred-

My wife indeed plans to use it for a plant stand-As I mentioned to Tom-It began as a full length lamp but I backed out as the design just didn't look good.

The base is made from three blocks aprox 4x4x11.5. The legs are joined in the middle with a triangular piece aprox 3.5 along the sides and 3" thick- double loose tenon joinery. I regret that I took virtually no pictures during fabrication..this drawing shows how I assembled the base.

...


Re: Tall Tea Table in Black Walnut

#9

Alan Young

Re: Tall Tea Table in Black Walnut

Alan Young

That guy on facebook has been copying everything I make. I can't shake him!

Re: Tall Tea Table in Black Walnut

#11

Barb Siddiqui

Beautiful, Alan!

Barb Siddiqui

Re: Tall Tea Table in Black Walnut

#12

Re: Tall Tea Table in Black Walnut

Fred Davis

That is a great detailed drawing , Alan , but what I was referring to was the base, the paint grade base on the wall , the base with a base shoe . that board Carpenters put at the juncture of wall and floor, my fault really for being unclear again. ;-))

FredD

Re: Tall Tea Table in Black Walnut

#13

Alan Young

Oh THAT Base!

Alan Young

I can't answer that question as these pictures were taken in the lounge at my church. Is there something odd about it?

-Alan

Re: Tall Tea Table in Black Walnut

#14

Great veneer work!!

Jesse Cloud

Re: Tall Tea Table in Black Walnut

#15

Re: Oh THAT Base!

Fred Davis

Most people would never notice a little thing like the base being incomplete, but I installed base for so many years that it was the first thing I noticed besides your fine table, don't worry about it .

FredD