Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

How in the world do you get sleeves off or on

Posts

How in the world do you get sleeves off or on

#1

How in the world do you get sleeves off or on

Steve in Phoenix

Spindles! Grizzly G1071. The spindle has sat without a sleeve on it for a couple of days. Now I can only slide one on 3/4 of the way. Now I cannot get it off either...

Re: How in the world do you get sleeves off or on

#2

Re: How in the world do you get sleeves off or on

Grant in Iowa

Assuming it is removable, lay the drum on its side and roll it like making a snake with clay. You can add more pressure by adding a board on top of the drum (like a teeter totter) and placing one hand on each end and going back and forth while applying downward force. Works for me with my spindle sander.

FWIW,

Re: How in the world do you get sleeves off or on

#3

Thank You!!!

Steve in Phoenix

That worked perfectly. I used a 3' 2x4, starting at the bottom. and rolling to the top. The sleeve slipped right on. It's alot more pliable than I thought it would be...

You are the man,

Steve