Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Disk Sander

Posts

Disk Sander

#1

Disk Sander

Larry

What is a good speed for a 12" Disk Sander?

Thanks,

Re: Disk Sander

#2

Ellis Walentine

Somewhere between...

Ellis Walentine

...1725 rpm and 2500 rpm would be my preference. When we were testing machinery for the magazine, we found that direct-drive disks on 3450-rpm motors burned the wood too much. So, if you're looking at a direct drive unit, I'd recommend a 1725-rpm motor. On a belt-drive unit, I'd keep the rpms under 2500.

Ellis