Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

OT Another Windows 7 question

Posts

OT Another Windows 7 question

#1

OT Another Windows 7 question

Barry Irby

As my many posts about the new computer have indicated, I am struggling with Windows 7 and my other software.

I just noticed the computer indicates it is 8:00 AM when in fact it is 11:00 AM. So does the printer that is attached to the system. I have had this come up several times and have gone in a set the clock. I am wondering why this persists. I thought on previous occasions the computer was wrong and the printer was right.

Anybody got any idea why this is happening and what to do about it? And, Is there a way to tell the system to go where ever it goes and check and reset the time.

Re: OT Another Windows 7 question

#2

Re: OT Another Windows 7 question *LINK*

Dave Paine

I am also new to Windows 7. Installed on a PC connected to the TV/receiver. Microsoft have really moved things around.

Quick Google search for Windows 7 Time Sync gives many useful link, one is attached.

FYI, sometimes the computer clock gets reset. Happened to this PC last week after a power blip in a storm. Computer lost its CMOS (basic settings including time). When Windows boots it first reads time from the CMOS. If a task is scheduled it will then read time from the Internet, assuming the PC is connected to the Net.


http://social.answers.microsoft.com/Forums/en-US/w7programs/thread/3ad0278b-370d-416d-867a-534729ca7d32

Re: OT Another Windows 7 question

#3

Re: OT Another Windows 7 question

John McGaw

The answer is pretty much the same for every version of Windows (and most other operating systems I can think of): you set the computer's hardware clock in the BIOS. Then you set the operating system clock paying special attention to the time zone and daylight savings settings. Then you turn on the automatic time setting function so that the computer will check with "the big atomic clock in the sky" for the precise time from then on. As for printer time settings, none of my printers seem to know or care what time it is so you'll have to read the manual on that one.

Re: OT Another Windows 7 question

#4

Re: OT Another Windows 7 question

Will

Hi Barry,

Given the problems you are having, I would suggest you join this group.

http://tech.groups.yahoo.com/group/TechSupportForDummies/

I have been a member there for years, and they do a great job of helping out people that need computer help.

Good Luck,

Will.

Re: OT Another Windows 7 question

#5

Re: OT Another Windows 7 question

Howard Norman

I have never seen a printer with a clock. Wonder why they put one there?

As far as the computer John McGaw has it right there, as he usually does when it comes to computers.

Re: OT Another Windows 7 question

#6

Interesting.....

Barry Irby

I went into the time through the time setup at the lower corner of the screen and discovered it was set for Pacific standard time and I am in the eastern time zone. I reset it to Eastern and reset the clock. It seems to be "holding".

Then I went into the control panel setup the printer and reset that clock. It did not take. Just now I looked at it and it was 3 hours behind again. I reset it again and it has been holding for four minutes. I dare not leave the room.

It is actually an All in One machine. A Hewlett Packard that prints, faxes, copies, and scans. (Sometimes all at the same time.) Probably has a clock because of the fax. I do not recall setting it before. I think it looks online for the time also.

Re: OT Another Windows 7 question

#7

Re: Interesting.....

Howard Norman

>Probably has a clock because of the fax<

Barry, I bet you are right. I had one of those things a long time ago and it may well have had a clock, in fact not that I think about it, it must of had a clock to time stamp FAX's.

Re: OT Another Windows 7 question

#8

Re: Interesting.....

Don Evans

If you loaded the software that come with the HP you should have an icon on desktop that lets you get into the printer and do settings.

You can also do them from the front panel on the printer, it should have a "settings" button on the panel near the LCD screen, in settings you can scroll through the menu and find where to set the clock. No it doesn't get it via internet.

The manuals are usually simple and short, you should find how to do it in there.

Don

Re: OT Another Windows 7 question

#9

Re: Interesting.....

John McGaw

When dealing with Vista and Windows 7, old software sometimes lets us down because the operating systems do their best to prevent direct control of hardware devices. Most of the time the really old stuff won't even install; sometimes when it does install it no longer does exactly what it should although one can occasionally get around this by running the software with administrative privileges.