Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Tip to remember-do milling and joinery quickly

Posts

Tip to remember-do milling and joinery quickly

#1

Tip to remember-do milling and joinery quickly

Stephen Kirk

I'm building a rolling kitchen island which has become a several month project that is worked on when I get time. Now, even though I flattened, acclimated and then finished sized my pieces at the start, things still like to move around. I definitely see the fit of joints that were cut weeks ago changing. I'm using sly mortise and tenon joints. If a rail or leg develops even a bit of twist it'll throw things off. I think I can work with it all and bring things into square.

So, as something I'm learning, try to move throw whole chunks of work as quickly as you can. For me, this means I should have done the legs, rails, stretchers within a few days, not a few weeks. Sometimes life happens and then you get to deal with a project going a bit off. And yeah, I'm using sly solid wood, plywood resists this tendency a bit better.

Hope maybe this can help someone!

Re: Tip to remember-do milling and joinery quickly

#2

Re: Tip to remember-do milling and joinery quickly

Jesse Cloud

Another technique is to 'rough mill' your stock, leaving it a little fat if it has to sit for a while, then final mill the stock as you need it for the joinery. But once the joinery is cut and fit, its good to glue soon. I always try to break large projects into subassemblies that can be glued up as you go.

Re: Tip to remember-do milling and joinery quickly

#3

Got a question...

doug f, san clemente, ca

That's a good reminder that the primary tenet of woodworking school was that "Wood moves!" It's Mother Nature's way of making woodworking fun. :D

Silly question; I'm a bit confused by your reference to "sly" mortise and tenon joints and "sly" solid wood. Not a word I have seen before and I was curious about its meaning.

Doug

Re: Tip to remember-do milling and joinery quickly

#4

Re: Got a question...

Stephen Kirk

Oh, they are sly alright! But really, just in incorrect auto-correct. I'm on a spiffy little iPad and my on screen typing is still a bit off.