Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Portable/job site table saw

Posts

Portable/job site table saw

#1

Clint Searl

Portable/job site table saw

Clint Searl

I'm looking to get a portable/job site table saw. It will be used mainly for ripping 8/4 and lighter material. I have no experience with one and would appreciate any comments and/or recommendations.

TIA

Clint

Re: Portable/job site table saw

#2

Re: Portable/job site table saw

George Colonel's Workshop-Havertown PA

Hello Clint,

My #3 son Ken is a contractor and has used several. His favorite has been the Ridgid for on-site work.

George

Re: Portable/job site table saw

#3

Re: Portable/job site table saw

Thomas Skaggs, Foothills of Mount Level

Clint,

There is a review of them in the current issue of Fine Homebuilding Magazine. Tom

Re: Portable/job site table saw

#4

Re: Portable/job site table saw

FredD

Clint , I have a Delta portable on a Delta stand , I used no more then a few times to cove drawer fronts with a jig made for just purpose.

I hav'nt used it in about three years or , new condition , you want a look I will send you a pic , it's in my way and I will be glad to get rid of it to a woodworker that can use it .

The price will be right .

FredD

Re: Portable/job site table saw

#5

Clint Searl

Re: Portable/job site table saw

Clint Searl

Fred, thanks for the offer, but I'm kinda fixated on the Bosch right now, which appears to have the features I'm looking for. I'm setting up a permanent shop at our vacation home near Albuquerque, but don't want to go whole hog with a stationary saw.

Clint Searl

Re: Portable/job site table saw

#6

Re: Portable/job site table saw

Ken Bellock

I have the Bosch, and I love it. I do wish I had a cabinet saw for what I use it for, but I just do not have the room. Here are my thoughts on the saw after having it for about 3 or 4 years now. I use mine in a hobby shop, in the space of a 1 car garage.

Pro's

The gravity lift folding mechanism of the table is a joy to use.

Everything you need, including wrenches, extra blades, fence, and miter gauge, stows away nicely on the saw.

It rolls nicely where ever you need it.

It takes very little space when folded and can be stored standing or laying down.

Power is good.

Dust collection works very well with my 1200 cfm dust collector.

The rule is very accurate for setting the fence, even when using the table extension.

Whatever they coat the table top with has made the top maintenence free.

Con's

Whatever they coat the table with makes it so nothing slides very nicely through the miter slots.

You have to be careful with the fence, it very easily loses parallel with the blade. I check it every time I have to set or move the fence.

It's very "tippy" when cutting full sheets of plywood. I have all the table extenders for it, and they work well, but cutting a full sheet of plywood on your own is hard enough without the saw tipping out from underneath you. I now cut full sheets with a circular saw.

There is a lot of plastic on this saw for the price tag.

I cannot comment on the blade guard, it has been sitting on a shelf in my shop since the day I brought the saw home. I bought the saw before they started putting the riving knife on it.

Hope this helps. For the money, as much as I do like the saw, I would still prefer to have a cabinet saw, but given the limitations on space that I have to deal with, the saw works very well for me.

Re: Portable/job site table saw

#7

Re: Portable/job site table saw

Kevin Stanbary - McHenry, IL

Whichever jobsite saw you get, I'd recommend the Bosch gravity rise stand.

I picked up a Makita 2703 a while back at a screaming good deal and got the Bosch stand to keep it on. The saw is not bad; my biggest gripe with it is that the miter gauge is not the best and the bar on it is non-standard so I'm stuck with it. The fence has the same features Ken noted for the Bosch saw, but as long as you're careful with it, it's OK.

I think the stand is fantastic though. You can mount pretty much any saw on it without too much trouble. It's easy to stow/unstow and I've found it to be very stable shuttling it around in my garage.

Re: Portable/job site table saw

#8

Re: Portable/job site table saw

Dave Bair, Eaton Rapids, MI

FWW and PopWood both reviewed portables this past year and agreed that the Bosch was tops.

Re: Portable/job site table saw

#9

Clint Searl

Re: Portable/job site table saw

Clint Searl

Thanks for the comments. I'll go with the Bosch.

Clint