Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Veneered project - reactivate PVA with an iron?

Posts

Veneered project - reactivate PVA with an iron?

#1

Veneered project - reactivate PVA with an iron?

Howard In Toronto

Last night I put the finishing touches on a veneered tabletop.

Unfortunately the humidity in Toronto jumped this past few days and this sheet was much more ripple-y.

I clamped it using sheer weight - a large sheet of MDF and TONS of books to weight it down.

I did the last surface for this project when there was less humidity. I significantly diminished the ripple-iness with an iron. It'll be 24 hours before I can get back to it and I'm wondering if anyone has enough experience trying to "reactivate" PVA type glue to straighten the veneer out a tad.

Thank you.

Howard

Re: Veneered project - reactivate PVA with an iron?

#2

Re: Veneered project - reactivate PVA with an iron

pecker

Most if not all the Titebond pva glues can be ironed back down for a day or two. It help to go behind the iron with a veneer roller or veneer hammer for some added pressure on the bubbled area.

I think the white glue can be reactivated forever, the type III for a couple days, the type II somewhere in between.