routing cherry and maple
McKay
Even with a sharp bit cherry and maple will often burn. (especially on the end grain). Does anyone know why these two woods will do this so much? 
Knowledge You Can Build On — Est. 1998
routing cherry and maple
McKay
Even with a sharp bit cherry and maple will often burn. (especially on the end grain). Does anyone know why these two woods will do this so much? 
One word
Mark Mandell - Gone Round In Jersey
sugar
That's why your feed rate, both routing and sawing, has to be higher with these woods.
Before doing any router work on either, I carefully clean each bit I will use, and then I'll do a series of lighter cuts so I can move faster to prevent the bit heating up to "sugar-toasting" temps.