Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

WC Weekend Accomplishments....

Posts

WC Weekend Accomplishments....

#1

WC Weekend Accomplishments....

Dennis E Peacock

26 April 2010

Good Morning Everyone,

It's been a very busy week both at work and at home. The first thing I'd like to do is offer my prayers for those that have been hard hit by the recent severe storms in both Mississippi and Alabama. My heart goes out to all those family that lost loved ones in the tornado's.

Been working at the day job a good bit and I have been working a lot on my honey-do list around here at the house. The other thing that's taking a good bit of my time is my dad's cancer treatments and trying to help my dad and mom by checking up on them, offering to travel there to help them as they need me, and just wondering why about a lot of things. My dad has now finished radiation treatments and nothing has improved. Now they are planning on starting chemo treatments maybe some time next week.

To top it all off, my daughter graduates the 15th of May and we are busy with all that's involved for her graduation.

No woodworking for me this time....just gardening and yard work that did involve moving some wood to the wood pile. :D

So what did YOU do this past weekend?

Best of weeks to you all.

Dennis Peacock

Re: WC Weekend Accomplishments....

#2

"Somebody" didn't want me to work

Terry Alexander

Had to put 2 parts on the underneath carriage of my riding lawn mower and replace the belt and blades (2 blades...42" cutting width). New belt is longer than old one. I didn't know this. The play (and associated flay) broke the 2 parts I just put on. So....SWMBO is picking up new parts...again.

So, on to the table saw to continue working on my cabinet doors and drawer fronts. About a month ago my link belt (that I've had on the saw for many years) broke. Got the new one. Put it on. Made about 6 cuts and then all kinds of racket. Belt had stretched to the point that it was rubbing on the motor mounting. Took 3 links out. Cut about another 3 pieces. Belt came off the pulley. Cut another 3 pieces. RACKET....belt stretched again and hitting motor mount....AGAIN. Told SWMBO if 1 more thing happens we're shutting off the lights and calling it a day. Took out 3 more links. Cut about 3 more pieces of wood. RACKET....belt stretched AGAIN.

Left the saw right where it is with a piece of wood still on it. Turned off the lights, closed the shop door and watched the Rangers beat Detroit.

BTW.....my belt doesn't fit "in" the grooves of the pulleys. It runs at kind of an angle. Anybody else have this problem.

Terry Alexander in West Texas

Re: WC Weekend Accomplishments....

#3

Belt

Mark Mandell - Gone Round In Jersey

1. Wrong size belt, Terry. They do come in different widths.

2. Sounds like you may have been running it backwards. Link belts are uni-directional; rotation must match the little arrows printed on them.

Are you using a Fenner drive belt or a cheap knock-off? I've had Fenners (red with name printed) on my table and band saws for over 8 years and there has been "0" stretch or adjustment needed.

Re: WC Weekend Accomplishments....

#4

Re: Belt

Terry Alexander

Thanks...I didn't know there was a "direction" to the belt. I guess I got real lucky the first time I put the belt on (many years ago) and put it on correctly!

Good 411!

Terry Alexander in West Texas

Re: WC Weekend Accomplishments....

#5

Lee Grindinger

California dreamin'

Lee Grindinger

We have found Santa Rosa so bike friendly Ruthie and I bought a couple of bikes on Friday. Sunday we rode to the nearby town of Sebastopol for brunch at a nice cafe, then back home. 18 miles all told and it's clear our butts need to adjust to bicycle seats! But, beats the hell out'a a sofa cushion.

Re: WC Weekend Accomplishments....

#6

As Weekends Go

Mark Mandell - Gone Round In Jersey

We had a rather exceptional one.

Saturday was involved with some food preparation and a little chainsaw work, but capped off with a most excellent dinner at the verdant estate of our esteemed Host, Mr. Ellis, and his lovely Candy, made even better by the presence (and home-smoked salmon) of Clint and Natalie Searl.

Sunday dawned dull and rainy, but there was no diminishing the warmth of the Wharton Esherick tour we did in the morning. For anyone here who's within 150 miles of Paoli, PA, failure to go through the Esherick home/museum is a sin. A bit more driving and we spent the rest of the afternoon with a visit to The Barnes Museum in Merion,PA, which, if you care for Mssrs. Cezanne or Renoir, is a must see before it closes.

Re: WC Weekend Accomplishments....

#7

Re: Belt

Mark Mandell - Gone Round In Jersey

Terry, if you look closely, you'll see little arrows printed near the edges of the links.

Re: WC Weekend Accomplishments....

#8

Even easier

Lee Schierer McKean, PA

Belt direction is easy to determine. The tabs on the inside of the belt should travel ->//////// not ->\\\\\\\

Lee

Re: WC Weekend Accomplishments....

#9

Alan Young

Mixing Music with Wood

Alan Young

A friend of mine wrote a piece of music for Organ and voices. The premier was this weekend and I sang in the ensemble-10 voice male choir with organ. Here is the organist-practicing before the event on the recently renovated 1966 Casavant organ at Bethlehem United Church of Christ-Ann Arbor. I love the case work and carving.




-Alan

Re: WC Weekend Accomplishments....

#10

Uh........the tabs go on the INSIDE?!?!?

Terry Alexander

Re: WC Weekend Accomplishments....

#11

Re: Mixing Music with Wood

Carol Reed

Wow! What a gorgeous setting!

Re: WC Weekend Accomplishments....

#12

Re: Uh....huh

Mark Mandell - Gone Round In Jersey

Re: WC Weekend Accomplishments....

#13

almost got my cyclone dust collector installed

Andy Wright - Allen, TX

Bought a Penn State Tempest cyclone used last week, and got it assembled and mounted on the wall in my shop. Now I just need to get a 220 circuit installed and finish up the ductwork.

Re: WC Weekend Accomplishments....

#14

JL

Re: WC Weekend Accomplishments....

JL

Friday - set up lighting for a show but I didn't have to run the lights.

Saturday - adjusted lighting for another show, ran the lights for that show - babysat the playhouse for several hours. Installed some shelving at my house also. Anyone ever here of a "Banjtar"?? First time I'd ever seen one. Interesting sound.



Sunday - Verdi's Requiem down in the big city and dinner with friends.

Re: WC Weekend Accomplishments....

#15

Way cool, Alan

Bruce, a MN Galoot

One of the most interesting things I EVER did was help install a small pipe organ in the Lutheran center on the UND campus back in the spring of 1967, built by an outfit from Moorhead. I skipped class the whole week to help.

Then the guy who built and installed it gave me a private recital when it was finally operational, just the two of us sitting on the bench, Bach's Passacaglia and Thema Fugatum in c minor.

Re: WC Weekend Accomplishments....

#16

Extreme frustration

Bruce, a MN Galoot

So, I'm building this little entry table for our goddaughter on the occasion of her wedding. Over the weekend I hand dovetailed the drawer and brought it home to cut the slot for the drawer bottom. I set the table saw height, cut the slot in the front and one side and then proceeded to cut the bottom OFF the back piece (different thickness). I then put it all away and took a deep breath. Today I will cut another back.

Re: WC Weekend Accomplishments....

#17

Re: Extreme frustration

Barry Irby

I don't want to belittle your frustration, but that does not rate an Extreme frustration for me in my shop. Cutting the bottom off the back is just frustration. Extreme would be cutting the bottom off the front when it was grain matched into the front rail. And the table was already assembled.

Re: WC Weekend Accomplishments....

#18

Re: WC Weekend Accomplishments....

John Veerkamp, Western Mo

Went with My son into the woods and cut a 16" long osage orange spar for a Maypole for our youngest g'son's school. May day celebration is Saturday.

Re: WC Weekend Accomplishments....

#19

Ya got me there!

Bruce, a MN Galoot

I thought I did pretty well by not throwing something. Or cutting things into very small pieces.

Re: WC Weekend Accomplishments....

#20

Re: California dreamin'

Bob Entwisle in NJ

Hey Lee!

Glad CA is agreeing with you.

Look into replacement seats for those bikes.

My boss rides, and tells me that,though there is no magic 'comfortable for a million mile ride' seat, there are some that are better suited to, as he puts it, the more mature rider.

(Oh, and I'd appreciate it if you just tell Ruth that the new seat idea is yours alone.) :D

Bob

Re: WC Weekend Accomplishments....

#21

Ellis Walentine

Re: WC Weekend Accomplishments....

Ellis Walentine

Sounds like you've been really stressed, Dennis, and it's easy to see why. I hope your dad responds to the new round of treatments and that your daughter's graduation activities are happy and rewarding for you and your family.

Our weekend was also pretty busy, but with enjoyable doings. I had the pleasure of cooking dinner for Clint and Mark and their wives on Saturday. After being friends on WoodCentral for so many years, it seemed natural to get together to celebrate spring and shared interests. Between Clint's appetizers and Mark's dessert there was lots of great food, wine and conversation. I wish I could have all of you over sometime.

Sunday was quality time with my good half, finally getting serious about designing our kitchen makeover (for the third or fourth time), while trying to keep our wish list of features within the budget. (Lights? Who needs 'em? Range hood? Ha! New floor? What's wrong with the old one?) Actually, the budget is going to be mostly sweat equity at this point, and the time budget is going to be tricky, too. The summer is shaping up to be pretty frantic as usual, so all this kitchen work has got to be scheduled very closely, wedged between web work and travel dates. Carpe diem, I always say.

Have a great week!

Ellis

Re: WC Weekend Accomplishments....

#22

WOW.....What a difference...

Terry Alexander

Dang, but when you put the belt on correctly. I.E. NOT inside out, NOT running in the wrong direction.....

My tablesaw now runs like it did before my old belt broke. However, I did some damage to this belt when it kept dropping on the motor mount, so I'm sure I shortened its life tremendously.

NEWay...thanks guys......I just feel pretty.....well.....stupid :\

Terry Alexander in West Texas

Re: WC Weekend Accomplishments....

#23

Don't

Mark Mandell - Gone Round In Jersey

Ever think you're alone in that feeling, Terry. :D :D

Re: WC Weekend Accomplishments....

#24

Having Graduated

Mark Mandell - Gone Round In Jersey

from the Kitchen Renovation School of Hard Knocks, I volunteer to help.

Before:


During:


After:


Re: WC Weekend Accomplishments....

#25

Re: Never feel stupid

Carol Reed

Feel educated, Terry!