Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Exterior clear finish question

Posts

Exterior clear finish question

#1

Exterior clear finish question

Andy Halterman: Carving the singletrack

I've been asked to finish about 1800 square feet of exterior porches which are standard 1x4 T & G yellow pine porch material. The customer wants a stain and a clear coating on these porches. They have mentioned a product that they called "curethane". The only stuff that comes up with that term on google is a bowling alley finish. Spar varnish is not an option here. I need something that will hold up for at least a couple of years. These porches are covered but open to the elements. This house is located near the top of the Blue Ridge escarpment in an area that normally gets abundant rainfall, much of it in the form of thunderstorms.

Here's my plan.

1. Sand the porches

2. Stain with the appropriate combo of DuraSeal stains.

3. Coat the porches with something that will last a couple of years minimum.

So, I'm open to suggestions on this. I'm an interior wood flooring guy with not much experience with exterior coatings.

What do y'all think?

Gracias. That's Mexican for "thanks". :D

Andy Halterman

Dazed and confused in Hendersonville, NC�

Re: Exterior clear finish question

#2

Re: Exterior clear finish question

Christopher Simpson

Pine tar! (grins) What about a marine grade epoxy? You could overlay a sheet of clear fiberglass and impregnate it with epoxy like a Kayak. you would need to test it over you stain make sure it will stick, some stains are bad about that. Never tried a deck this way but it seems like it would work.


img

Re: Exterior clear finish question

#3

Re:Epithanes or a West Systems Expoxy

Stephen Roth

Check their web-sites. Both are excellent for this application.

Re: Exterior clear finish question

#4

Re: Exterior clear finish question

Howard Acheson

Andy, neither an epoxy or the Epifanes would be a good choice. Epoxy is quickly attacked by the UV in sunlight, deteriorates and peels. Where epoxy is used outdoors, it must be coated with a clear finish containing UV inhibitors. The UV inhibitors are "used up" as they work. After about a year is bright sunlight, they no longer are effective and a new coat must be applied to maintain protection and appearance. Epifanes is an excellent clear marine oil based varnish. Arguably, it's the best. It's very expensive but like all marine clear finishes it requires annual re-coating to maintain its appearance and integrity.

So, what to use? Consumer Reports is continually testing outdoor deck finishes. They report the results annually, generally in May or June. Go to your library and check a copy. I will tell you that no clear finish lasted more than a year in their testing. The longer lasting finishes were ones that were semi-opaque or opaque.

Re: Exterior clear finish question

#5

Re: Exterior clear *LINK*

Mark Mandell - Gone Round In Jersey

Look into "Penofin" oil at the link.

This is non-film forming stuff that does well on horizontal surfaces. It is a bit touchy/messy to apply as you brush on/in, wait about 15 min., then wipe off. Wait too long to wipe and you have a tacky mess to scrub with a brush and Simple Green to get the excess off.

Comes in transparent tones + other options at the link.

Ain't cheap, but excellent coverage, and several grades. For a shaded but exposed area, you don't need the top grade.


Penofin