Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Tall featherboards?

Posts

Tall featherboards?

#1

JL

Tall featherboards?

JL

I have "short" plastic featherboards. I am going to be doing some projects which will require taller featherboards.

I bought a set of Rockler's a few years ago, and they have worked quite well.

So - I either need ideas on how to make taller featherboards or I need a source for reasonable quality taller featherboards.

I will be using them on my router table and my tablesaw (possibly even my band saw).

TIA

Re: Tall featherboards?

#2

Re: Tall featherboards?

Jorge Casta�eda

Hi Jerome,

Any piece of hardwood of the proper length and width, just cut a bunch of 2" kerfs in a band saw, even softwoods, I have some made of white cedar and have been using them for years.

Jorge

Re: Tall featherboards?

#3

Agree

George Colonel's Workshop-Havertown PA

Good Afternoon JL,

I made mine from red oak, and kerfed them about as Jorge described. They last a long time. Mine are going on 10 years.

George

Re: Tall featherboards?

#4

Re: Tall featherboards?

Bill Howatt

Yes, anything pretty well works. I have made them in oak and western red cedar. Worse thing that happens is you'll lose some "teeth" and perhaps make a new one.

Bill

Re: Tall featherboards?

#5

Re: Tall featherboards? *LINK*

Jesse Cloud

I agree with the advice above, but, if you like the Rockler featherboards, here's their double tall version:


Rockler stacked featherboard

Re: Tall featherboards?

#6

Ellis Walentine

Case by case basis

Ellis Walentine

Hi JL,

Something like the Rockler dual-height featherboard might work for you -- or not, depending on what you're trying to do -- but you can make your own, per the job at hand, in just a few minutes.

You didn't mention what it is about your project that will require a taller featherboard. I've really only ever found a need for taller support fixtures when resawing lumber on the bandsaw. Is this what you're up to?

Ellis

Re: Tall featherboards?

#7

JL

Not resaw

JL

Mostly router stuff. I've been wanting to do some raised panels for some casework. I've bought what looks to be a good vertical router bit. I naturally want to get good "pressure" against the fence. Therefore I thought about a taller featherboard. I can always clamp a secondary fence to my router table and attach a homemade featherboard to that - that's what I was thinking about doing.

Re: Tall featherboards?

#8

Ellis Walentine

Couple ideas

Ellis Walentine

Aha, now I get it. You can just use your regular featherboard, but elevate it above the cutter height with a suitable spacer block arrangement. You want the pressure to be on the field of the panel, not on the edge where the material is being removed.

Yet another option is to make a featherboard from a 2X4 on edge, with the bottom part bandsawn away so it is not putting pressure on the edge itself.

Ellis