Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Dewalt DW745

Posts

Dewalt DW745

#1

Dewalt DW745

R.J. Whelan

I'm thinking about buying one of these portable tables saws for job-site use, and have a couple of questions for anyone who actually owns one:

1. Is the power adequate for 4/4 domestic hardwoods?

2. Can one use a stacked dado with this saw.

3. Is the mitre to blade measurement a standard dimension (ie: can I use an aftermarket mitre guage interchangeably with my cabinet saw)?

Thanks to one and all for any assistance.

RJ

Re: Dewalt DW745

#2

Re: Dewalt DW745

Andy Wright - Allen, TX

We went on a project with our church to a campground where some remodeling was being done and I used that model of table saw for a week building cabinets and shelves

A few observations -

1) the saw is VERY light weight with a small table. It is good for cutting any large wood (plywood, long boards, etc)

2) the saw is not very powerful, but did manage to rip a lot of 2x4 and 2x6 stock over the week. If you feed a pine 2x4 though too fast, the saw will bog down and stall.

3) the saw has a nice splitter/guard with tool-less removal

4) I think you could probably install a stacked dado blade, but I am not sure the motor would handle it

5) miter slot did appear to be a standard size although i did not use any miter

gauges aside fromt eh one that came with the saw

Overall, I would give this model a B. I have used several different benchtop table saws, and have not really been impressed with any of them. If you are planning to rip small stuff at a worksite then this saw will do the job, but generally speaking I found it to be a HUGE step down from the Craftsman contractor saw I owned for years.

I personally think you will be happier if you take the $400 you are thinking about spending and put it towards a Festool track saw with the parallel rail set up. That way you get portability, accuracy, and a quality tool you can use for other purposes (like ripping sheet goods in your shop)

Re: Dewalt DW745

#3

Re: Dewalt DW745

Barry Irby

I agree with Andy.

I used on on a job last summer. It was great having a table saw on the job. I made a major repair in hardwood flooring with it. Ripped pieces, remade tongue and grooves with it. Ripped 2 x 4s and 5/4 deck boards. It was very handy. Somewhat under powered, but it did the job. I Used the mite slot, but the miter gauge was supplied with the saw. (It was a loaner.)

Don't know if any other miter gauge will work and can't remember whether it would accept a dado blade.

I am doing another remodel and miss having a TS on the job. Went to buy one and was stopped in my tracks by the price (at Lowes).

Now I am considering making one of those third world workshops. A SkilSaw and a router mounted under a table.

Re: Dewalt DW745

#4

Thank You For Your Replies

R.J. Whelan