Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

A question about furniture wax

Posts

A question about furniture wax

#1

Clint Searl

A question about furniture wax

Clint Searl

All available film finishes offer a high degree of resistance to common spills and scuffs, so wax adds negligible added protection. And since these finishes are available in a range of sheens, wax isn't necessary to make a shine. So if I finish with shellac, lacquer, poly, or varnish, what's the point of putting a wax on top?

To answer my own question, after a usual solvent based alkyd lacquer finish in a "rubbed effect" sheen, I'll do a final rubout with 0000 steel wool and Butcher's brand wax, not because it's necessary, but because it seems to even things out and feels good.

The prices for different brands range:

Butcher's $.81/oz

Liberon Black Bison $1.25/oz

Goddard $2.66/oz

Renaissance $3.64/oz (Assuming the 200 ml jar is about 7 oz)

What do I get with the higher priced spreads?

Clint

Re: A question about furniture wax

#2

Darn good question...

doug f, san clemente, ca

I'm just an amateur finisher so I've asked some pros, both woodworkers and refinishing experts the same question. I got a couple of answers that made sense. First was for just an extra measure of protection against abrasion and water. Certainly not bulletproof, but just a little extra.

The answer that made the most sense, though, was that a waxed and buffed piece just FEELS better to the touch. Though it does change the sheen slightly, it wears off quickly, but the feel of the waxed surface is really nice, even to those who are not wood aficionados.

I see no other reason to spend the time and sweat to wax and buff furniture, but I'm sure you'll get other opinions. Try it both ways and see what looks and feels good to you.

BTW, I use Johnson's Paste wax and Liberon (I like the smell), but the very expensive waxes just seem like overkill.

Doug

Re: A question about furniture wax

#3

Re: A question about furniture wax

John Veerkamp, Western Mo

I use Ren Wax on my turnings because it makes them feel good. Very important for turned items IMHO. It does not show finger prints like Tre-wax or Johnson's. A little goes a long way on turnings. I've gone thru only one small can in 4 years.

john

Re: A question about furniture wax

#4

Re: A question about furniture wax

Christopher Simpson

To wax a piece at its completion should not be hard work. It�s the final touch to a piece that you have spent so much time on. By using rubbing techniques you can play with levels of sheen especially in pieces with carving or molded detail. The wax can protect from lots of everyday wear and it�s much easier to refurbish the wax than finish beneath. The majority of my clients don't like shine. So I use an R.E. lacquer hand rubbed with a good wax, you can't achieve that glow any other way. There are many types of wax but thats another show. I will write on that tomorrow. Now I must be with my girl.

Re: A question about furniture wax

#5

Never Use The Stuff

Mark Mandell - Gone Round In Jersey

On wood, that is.

On the finishes I rub out, the compounded [3-step Menzerna or 4-step Meguire's] surface carries that special tactile "feel" so often sought. We do, however, very sparingly use polish, namely Guardsman, as a cleaner to gently remove finger prints, paw marks, and dust.

One of the great sales slogans was/is by/for Johnson's Wax company stating "Good For The Wood Cause It's Wax" to get people to believe that somehow wax penetrates wood to "preserve and protect" it somehow. Total BS, of course, because wax molecules are too big to penetrate dry wood pores, but they made zillions that way.

Re: A question about furniture wax

#6

on wax

Christopher Simpson

You are correct that wax does not penetrate finish, which would be terrible if it did. It does not protect from drastic abuse such as alcohol spills, long-standing water, or heat. What you gain is a slick surface so it is not as proned to scratching. It also protects from varying levels of humidity or water vapor.

Some believe that waxes are more expensive because of the added scent or the tariffs to bring them here from a far away land. I know from researching formulas and importing wax that these things are pennies. The price increase is due to the quality of the products used in the mixture, which make it easier to work with and lend to a better finished product. Lots of waxes have fillers, are too astringent for the finished they are being applied to and leave streaks if not very careful. I wish these maladies were localized to the cheaper waxes but I have tested many expensive brands and found these things to be true.

There are four main waxes I use. First is my workhorse Goddard�s Cabinetmakers wax. It is the perfect blend of bees wax and carnauba with a white spirit vehicle. It applies and buffs out better than anything I have ever used. The other three I use for their restorative properties are; Lake One comes in a multitude of colors and works wonders on sun bleached pieces, Briwax I like to use on pine and oak pieces 14th-15th century, with its toluene vehicle it cleans away outer layers of old wax without affecting the ox blood. Never use this on a weak finish like French polish it will melt it. Finally for museum pieces I use Renaissance wax, which is a microcrystalline (breaks down when you buff it). This type of wax is used when an evolving patina must be protected.

Let me know if you have any hows or whys and I will try to help. I will just say this; everyone has their own way of doing things. I too am hard to convince there is a better way. I will always be open and love to test things. With my finish process I have never had a complaint, and have outlasted all of my competition in Houston. It's partly because my back is still in one piece but mainly because my clients love what I do.

Christopher Simpson

Re: A question about furniture wax

#7

Renaissance Alternative *LINK*

Thomas Skaggs, Foothills of Mount Level

If you decide to go the microcrystalline route Lee Valley has a wax that is like Renaissance but cheaper....called "Conservator's Wax". Good stuff. Here is a link:

Tom


Lee Valley Conservator's Wax

Re: A question about furniture wax

#8

Ellis Walentine

Here's what Michael Dresdner had to say  *LINK*

Ellis Walentine


Wax: Finish or Finale?

Re: A question about furniture wax

#9

Johnson's Wax Program With Fibber McGee & Mollie

George Colonel's Workshop-Havertown PA

Ah, Its good to wax nostalgic, Mark.

PS Anyone remember Harlow Wilcox? :<)

George

Re: A question about furniture wax

#10

David Barnett

I noticed the jar of Harris' UV Defender

David Barnett

Oh, how I wish it was still available, especial in the matte. Loved the strange smell, too. I'd almost go to Costa Rica to get some. The antioxidants did seem to work. For awhile, anyway.

Re: A question about furniture wax

#11

David Barnett

Talk about your wax buildup... *LINK*

David Barnett

I've lately become a proponent of it. As Dresdner mentions in the article posted by Ellis, you can mix your wax with solvents for spreadability, or heat it. I'm doing the latter.

I make encaustic* medium for my artwork. This is beeswax-based with damar resin added for hardness, toughness, to raise the softening point, and to increase clarity. Using refined (but not bleached) beeswax removes most of the pollen color, further clarifying the medium. For painting, I favor a 9/2 ratio of wax to resin. But as a furniture finish I can go up to 33-percent damar resin - very nice indeed - a wax-varnish hybrid.

I apply it hot with a brush or cloth. Warming the surface with a heat gun, I spead the melted medium freely. The fragrance is awesome.

It cools and hardens almost immediately but it can be reworked indefinitely. I like to apply a fairly thick coat, let cure and harden, then scrape with a card scraper, then heat it again until it flashes wet. When it cools again it has a perfect satiny glow. You can also buff it to a high gloss. Even higher gloss is possible with addition of small amounts of candellia or carnauba.

Thin or thick, this finish is far more durable than paste waxes due to the high resin content.

Anyway, I like how it looks, especially over a cured oil varnish, enjoy working with it, and as I said, it smells terrific.

*Greek for 'burned in'. The 'Punic wax' used to coat ancient warship hulls.


Wikipedia on 'encaustic painting'

Re: A question about furniture wax

#12

Clint Searl

Conclusion

Clint Searl

Interesting responses even if they didn't directly answer the question. It looks like the bottom line is that waxes of all sorts don't offer any measurable benefit to contemporary film finishes regardless of the cost. I'll continue to use Butcher's or Johnson to rub out a lacquer finish cause it feels good.

Clint

Re: A question about furniture wax

#13

Re: Conclusion, Alternative

Mark Mandell - Gone Round In Jersey

Actually, Clint, your use, basically as a lubricant, is perfectly valid. Years ago, I routinely used a "cooked" mix of carnauba, bee's, and tint as a finish for carvings and bronze castings. After patining the bronze, it would be still warm and the wax was brushed on and wiped off leaving a very rich surface. Carvings in tropical woods like Rosewood, Lignum Vitae, and Ebony that were difficult to finish with oils or film finishes, did beautifully with the hot wax application. Of course, those were not "high use" surfaces.

Re: A question about furniture wax

#14

Re: A question about furniture wax

FredD

Lately I have been using Mequiars cleaning and waxing liquid compound after the final rub out .

If your looking for the "touch" try this , you will be impressed.

Available at Auto parts and paint shops.

I was talking to a friend that owns a body shop in Abilene about Lacquer finish on wood and metal and he told me among other things that 3M had bought out Mequiars and reformulated the rubbing compounds.

Now instead of a grit for the cutting action they have developed a Chemical cutting agent that he is impressed with.

The Compound number stays the same, only the cutting agent is changed.

He also uses the Cleaning and waxing liquid for the final touch over a Clear finish.

FredD

Re: A question about furniture wax

#15

Re: Conclusion

Dave Bair, Eaton Rapids, MI

There are two benefits no one has mentioned so far:

Waxed furniture is far easier to dust, you can literally blow it away;

A waxed surface rejects jelly, peanut butter, etc., on kitchen cupboards just like it rejects glue when you don't want squeeze-out to soak into an unfinished surface.