Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Dado blades ?

Posts

Dado blades ?

#1

Dado blades ?

Bill White

Am lookin' to buy a dado set for the TS. I know that somewhere between a HF chinese frag grenade and a Forrest break-the-bank model there must be a well designed and resonably priced dado set. Are there any reviews that I have missed?

Bill

Re: Dado blades ?

#2

Re: Dado blades ?

Bill Howatt

Freud products usually fall between your 2 price points and their stuff is pretty good.

Bill

Re: Dado blades ?

#3

Re: Dado blades ?

David Yoho

Have you checked out Freud or Ridge Carbide? I purchased the Forrest set years ago and haven't looked back since.

David

Re: Dado blades ?

#4

Clint Searl

Try Ridge for multi-blade

Clint Searl

Re: Dado blades ?

#5

Re: Dado blades ?

Bill Tindall

I don't have a suggestion but I will offer some information. Quite often I am trying to cut a dado to fit something that will go in it. A good fit is +/- 0.005" or less. I find it a tedious operation adding and subtracting shims to get things just right. If the Freud dado with its handy adjusters works I would buy it in an instant if I didn't already own a fairly expensive blade. Or, hey, buy mine and then I can buy the new Freud blades with the handy adjusters.

Re: Dado blades ?

#6

Dale Lenz

A guy out West...

Dale Lenz

told me as we were discussing work boots, common topic on large project fires, Buy the Best You Can Afford. I sprung for the Forrest with a special grind and never looked back also. Freud makes a good sawblade. My next blade, if and when I purchase one will more than likely be a Forrest.

Re: Dado blades ?

#7

Re: Dado blades ?

Carol Reed

My current set is from CMT. Works very well. Beats the stuffings out of the wobble killer blade or the non-carbide Shopsmith set.

Agree with Dale. Cry once and then not again. Besides you deserve the best.

Re: Dado blades ?

#8

Re:20% off at Rockler!!

Dave (PacNW)

Rockler has a 20% off coupon currently! I used one to buy the Freud 8" Super Dado and saved a cool $40.00 This is a great dado set NO CHIPPING and flat bottoms. The adjustable set is $50.00 more so you would save another $10.00. ($150 for the Super Dado or $200 for the adjustable)

Dave (PacNW)

Re: Dado blades ?

#9

Re: Dado blades ?

George Colonel's Workshop-Havertown PA

Good Afternoon Bill,

I can't find fault with any reply I've read sop far. I couldn't justify very high end blades because I find the 8 inch Freud set fully satisfactory. If I were making more furniture and/or had more bucks to spend, I might feel differently. The Freud set, SD 208, has worked flawlessly for me for 10 years or so. Its a stacked dado design. A smaller dado of 6 inches would also work well for what I do. I would personallyrecommend you+ stay away from a wobble dado arrangement. I had one and threw it away.

George

Re: Dado blades ?

#10

Re: Dado blades, but also HP & dado dia.

Ray Newman

Besides the price, you also need to consider your motor's HP.

Seems that the Rule of Thumb is a 1-2 HP will easily swing an 6" dia. dado, but not an 8". It will/can bog down and overtax the motor.

3HP motor will swing an 8" dado blade

Re: Dado blades ?

#11

Re: Dado blades ?

Dave Paine

You do not state your budget.

You will get what you pay for. Higher price sets will be carbide and provide smoother cuts.

A few weeks ago I was at Woodworking show in Reading, PA, and could not pass on the Ridge Carbide 8 in Dado Master. Show price was $150.

I have used this a few times so far. Well balanced, smooth side walls, no tearout and almost smooth bottom. Seems like one of the chippers is ever so slightly larger.

All in all, very happy. So far the set does not seem to slow down my 1 3/4 HP motor. I have only tried cherry and pine so far, but did 5/8in wide cut. No feeling of being bogged down.

I also read good reviews of the Infinity Tools "Dado Master". Main difference is 6 tooth chippers vs 4 tooth in Ridge and other sets. I had been considering until I looked at the Ridge show price.

Re: Dado blades ?

#12

Have you tried the break-the-bank model?

Kelby

I started with a wobbler, then moved to the Freud stacked set. But one day I happened across a Forrest demo where they were using the Forrest stacked dado set. I was blown away, and picked one up. I don't remember what I paid for it (which is usually the case with good tools), but everytime I make a dado, I am amazed at the results. Perfectly snug dados every time.

I'm not a production shop or anything like it. However, as is often the case with good tools, I find a lot more opportunities to use it than I would have if I were still using the Freud or the wobbler set. While I don't remember what I paid for it, it has easily paid for itself.

Good luck with whatever you choose.