Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Delta (Dewalt/PC) equals NO customer satisfaction

Posts

Delta (Dewalt/PC) equals NO customer satisfaction

#1

Delta (Dewalt/PC) equals NO customer satisfaction

Todd Nebel

Dewalt - Delta - Porter Cable, is no longer in the customer satisfaction business anymore, IMHO. I say this coming off a very disappointing experience after my Delta (46-745) 16" Wood Lathe's Variable Freq Drive failed. Delta informed me that the lathe was discontinued in 2005 (only 5 yrs after being released), the electrical part is also discontinued and the only way to fix my issue is to replace the Variable Freq Drive and convert it from 110v to 220v. And get this, they want me to pay $950 for the parts. All they would say is sorry it's outside of the warranty. They never even asked me any questions on use. I tried to tell them that I found other people on the Turning Form here that have the same exact lathe and experienced the same exact issue and maybe it is a problem with the original design. I also asked if they could send a rep over to inspect my lathe because it's only been used for about 10 projects. I purchased it new in 2001 and used it about once a year for a bowl, pen, mallet, whatever. They don't care. I guess it was my fault not to use the lathe enough in the first 5 years to have it fail under the manufacturer's warranty. I know for me I will probably not buy another one of their products again if I can help it.

Todd Nebel

Re: Delta (Dewalt/PC) equals NO customer satisfaction

#2

Re: Delta (Dewalt/PC) equals NO customer satisfact

John Veerkamp, Western Mo

Todd,

Find a Baldor supplier. Either a local electrical motor shop or internet. The replacement controller for my lathe like yours is: Baldor Adjustable Speed Drive.

Cat. No 438010160209

Spec No IN0923E03

It is 220 but it is a simple conversion. Any motor shop can do it for you if you're unsure of your electrical Skills.

John

Re: Delta (Dewalt/PC) equals NO customer satisfaction

#3

Re: Delta (Dewalt/PC) equals NO customer satisfact

FredD

Todd, you may have been talking to a midlife crisis for all you know , never can tell.

Try John Laubach 913- 205- 8294 ,this guy adds meaning to the customer service field.

Explain the history of the Lathe and what seems to be a common problem and do not try to make it his problem.

He is very good at determining whether Delta can or should go the extra mile.

He is in KCMO and may hand you off to someone closer if your not in the middle of the country and it helps a bunch to get the place you bought the Lathe in the conservation.

Explain that the fix is a substantial sum relevant to your original out lay and had you known this could happen , you probably would have went with another brand.

Remember he is there to help , not to be yelled at ;-))

FredD

Re: Delta (Dewalt/PC) equals NO customer satisfaction

#4

I called John, but same response...

Todd Nebel

Hi Fred, thanks for the lead. I called John, but he too couldn't see beyond the age of the lathe and said he couldn't help me. Here's what I told him... Ok, the lathe is 9 yrs old, but it has hardly been used. If someone was willing to inspect the machine and even my shop they would be able to see it's not due to environment or use, must be manufacturer's defect. And I was very nice about it. I said that it's like the difference of driving a car for 6 yrs and putting 120,000 miles on it or putting only 6,000 miles on it. I would never call Ford and ask them to cover a transmission repair under warranty on 120,000 miles.

Anyone want to buy a non-working lathe? Make me an offer.

Thanks Fred.

Todd

Re: Delta (Dewalt/PC) equals NO customer satisfaction

#5

Re: I called John, but same response...

FredD

Todd , having a inspection record or record of attempts to repair without sucess is really key to getting someone like John's attention.

I had a problem with a DJ 20 8 inch jointer that the tool company I bought it from could not fix for longer then three or four months.

Between the two of them and the fact I had paid a considerable sum for repair work resolved the issue to my satisfaction .

I am sorry about your Lathe , The motor company may be the way to go .

I suspect however your going to have to spend some money before anything near what your looking for happens.

FredD

Re: Delta (Dewalt/PC) equals NO customer satisfaction

#6

I am trying to help need your contact info

mike American Sycamore

need your contact info.....I am trying to help with my connections at Delta.

Mike

Re: Delta (Dewalt/PC) equals NO customer satisfaction

#7

Re: I called John, but same response...

Todd Nebel

Hi Fred,

Thank you for taking an interest and providing some good advice. I hope Delta or Baldor comes through, I would like nothing better than to post that kind of a message here.

Todd